Models > EC5100XL

EC5100XL Whirlpool - Overview

Parts and Repair Help for models starting with EC5100XL

If you know the repair part you need, you can browse the list of all parts for models starting with EC5100XL, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your . We’ve also included any installation videos we have for EC5100XL parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Models starting with EC5100XL

$2.70

Screw

This screw is sold individually.

$3.56

Water Tube Kit

This tubing is 1/4'' in diameter and comes with 2 inserts. This tubing may be longer than the original, and may have to be cut.

$2.03

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

$3.96

Compression Nut

$39.77

Single Outlet Water Valve Kit

This single outlet water valve is intended for use with some commercial ice machines, and not refrigerator icemakers. It comes with a mounting bracket, two screws, and a washer.

$9.24

SCOOP

$4.46

Plastic Tubing Inserts - 4 Included

These inserts are used with 1/4 inch plastic tubing.

$248.20

Icemaker Water Pump and Motor

$227.43

Ice Grid Cutter

$50.09

Compressor Relay/Overload Kit

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Quit making ice

  • Customer: Chris from Flower Mound TX
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 15 of 17 people found this instruction helpful
This is a stand alone ice maker that uses a standard water valve. When the valve fails (usually stuck open) the water never chills enough to freeze because water is constantly flowing into the hopper. The valve is in the very front. Remove the front panel. Turn of the water supply and disconnect the valve. Replace the valve and turn on the water. Let the mac... read more

The water pump broke (too old).

  • Customer: NICOLAS from MCALLEN TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Socket set
  • 16 of 22 people found this instruction helpful
I removed the three nuts that hold the old pump, easy. Next step was to replace with the new pump, tricky, because it goes real deep in the machine and my arms barely reach it.
After several attemtps, I finally reached one screw and bolt it immediately. Rest was piece of cake.
What I liked most, is that you don't need to do any wiring connections,... read more

Noisy

  • Customer: Paul from Port Lavaca TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Socket set
  • 17 of 26 people found this instruction helpful
Easy to do.! read more