Quick Question!

Have you ever purchased from PartSelect.com before?

Models > E32AF75JPS1

E32AF75JPS1 Electrolux Freezer - Overview

Get Parts and Repair Help for E32AF75JPS1

If you know the freezer repair part you need, you can browse the list of all parts on the E32AF75JPS1, or you can search by name or part description. You can also find your part by where it is located on the E32AF75JPS1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your freezer. We’ve also included any installation videos we have for E32AF75JPS1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the E32AF75JPS1

[Viewing 5 of 5]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Water Inlet Valve

When energized, this part releases water from the supply line into the ice mold.


Defrost Thermostat

This thermostat regulates and keeps the temperature at a constant temperature for the freezer section.


Air Filter

Sold individually.


Ice Maker with Cover - 8 Cube


Evaporator Fan Motor with Wire Harness - 115V

This evaporator fan motor is located in the back of the freezer, and circulates air over the coils. These coils will convert the heat into cool air, which is then circulated.


Adjustable Leveling Foot - Black

Sold Individually.



This icemaker drive gear is for the ejector blades



Sold Individually.


Defrost Heater

This part is located at the bottom of the evaporator. The defrost heater heats the evaporator in the defrost mode of operation to keep the cooling coils from frosting over. The th...


Blade-condenser fan

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken ice maker

  • Customer: Juan from Miami, FL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 155 of 210 people found this instruction helpful
Unplugged faulty ice maker, removed two screws holding it to the refrigerator and took it out. Reversed the operation with the new ice maker and after a few minutes presto, we have ice. read more

Was not filling the ice tray full.

  • Customer: Orville from Garland, TX
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 36 of 60 people found this instruction helpful
I had put in a new ice maker and it still had the problem, (I needed the Ice maker anyway) I installed the vale and while I was at it I put a five year filter on the water line that went from the value to the Ice maker, it took less than one hours, the ice is making like it did when it was new, I could not be more please at theis time. Thanks for your Intere... read more

Water Was Not Being Sent Up To Ice Maker

  • Customer: BARBARA from DIAMOND, IL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 18 of 26 people found this instruction helpful
I removed a couple of screws from the old part, and inserted the new part. Replaced the screws and I was done. No problem. I'm an almost 60 year old woman, and fixed this myself. It was so easy. read more