Models > E24WC75HSS0

E24WC75HSS0 Electrolux Wine and Beverage Cooler - Overview

Get Parts and Repair Help for E24WC75HSS0

If you know the wine and beverage cooler repair part you need, you can browse the list of all parts on the E24WC75HSS0, or you can search by name or part description. You can also find your part by where it is located on the E24WC75HSS0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your wine and beverage cooler. We’ve also included any installation videos we have for E24WC75HSS0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$19.73

Run Capacitor

This part is attached to the compressor. It helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.

$16.02

Air Filter

$5.20

Screw

Cross Recessed Pan Head Screw Size: 10-16 X 0.500

$5.20

Hexagonal Screw

$5.27

SCREW

$93.18

Condenser Fan Motor

This fan motor circulates the air through the refrigerator grille and cools the compressor and condenser coils. It also helps to evaporate extra water in the drain pan.

$23.27

Blade-condenser fan

$23.91

SENSOR

$29.73

CORD-SERVICE

$7.25

Clip

This white clip is an inch long.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

just quit working

  • Customer: Denise from Lowell MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 9 of 12 people found this instruction helpful
Bought a new
capacitor. read more

Refrigerator quit running

  • Customer: Frederic from Daytona Beach FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 6 of 10 people found this instruction helpful
I located the part that was the culprit as it had buzzed very much before quitting. This is an easy removal as the part is in a two prong jack and just needs to be carefully removed with the new part inserted back in the jack provided. The refrigerator works fine now, but the run capacitor will still buzz on start up of the compressor. I do hope this is norm... read more

Refrigerator was not cooling

  • Customer: Vicki from Johnson City TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 6 of 10 people found this instruction helpful
This was a simple job. Raised the flap in the back that houses the compressor, removed the wire that holds the relay, pulled out the old relay and pushed the new one on. Replaced wire holder and that was it. Plugged it frig and freezer is at zero and lower compartment at 35. As easy as brushing your teeth! read more