E23CS78HSS4 Electrolux Refrigerator - Instructions

Removed lower cardboard cover, shut off water supply valve, unpluged frig. Used wrench to remove 3/8 water line from water valve, removed electrical connectors from solenoids, used fingers to unscrew water connections from valve.

I had removed the current cover from the refrigerator by lifting it out of place. I removed the glass insert and placed it in the new crisper cover. I placed the new assembly into position, added the drawer back into the drawer slides, then the refrigerator was back to new!

Punch out center of old support, then pull it out. Insert new suppport, insert center and tap flat with hammer. All done!

Pried the broken support insert out with a screw driver and pulled it out with pliers, then inserted the new and pressed it in and Presto the drawer now works good again.

ordered the part, watched the video....it was a snap

I used the paint spatula to pry out the old part and then put in the new part and pushed in the holder with my fingers. Super easy.

I had a repair man do the work.
That's always best.There was one day delivery on the part and the price was great. Thanks

My Frigidaire Drawer broke... I ordered the parts and installed it within 5 min. It took more time to remove the food and drawer then it did to install the pegs.

turned off water supply, removed cardboard back, removed supply line, unhooked all color coded connections,took out bad water valve and replaced with new one note: the new valve came with pex connections so i carefully cut off flared tubing ends with sharp razor knife making sure when i pushed tubing into new valve that i did so with some force until i HEARD and felt them snap in place very simple plus i received the new valve in 2 days very happy with PartsSelect.com you CAN do it

Took out the support and put back in the new one.

Turned off water supply disconnected hose from valve removed cardboard backing removed the screws holding valve ass'y disconnected the three wire connections disconnected five hoses then cut and installed in new valve per instructions provided reconnected three wires reinstalled valve ass'y turned water supply back on and checked for leaks by engageing filtered drinking water in the refrigerator door replaced backing to complete job.

Just pluged it in

My repair was a simple as logging on to the "PartSelect.com" website - very easy to find the specific part I needed. The website makes the part selection a breeze.

remove back cardboard panel, cut off water supply, remove screws holding valve to back of refrigerator, unscrew water lines & reattach to same fittings on new valve, screw new valve in place, replace cardboard cover.

The molded plastic bracket holder on one of my shelves was busted. It was obvious I just needed that particular part, and didn't need a full 'service technician' rigamarole. It's great to have been able to find the part online. If arrived fast and took less than 5 minutes to fix!