Quick Question!

Have you ever purchased from PartSelect.com before?

Models > E23CS78DSS3 > Parts

E23CS78DSS3 Electrolux Refrigerator - Parts

All parts for the Electrolux Refrigerator E23CS78DSS3

Below is a list of all parts for the Electrolux Refrigerator E23CS78DSS3 - Side-by-side. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the E23CS78DSS3
1-14 of 316
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.93

Crisper Cover Support - Front

This crisper cover front support is used to keep the crisper shelf in place, and may need replacing if the door will not open or close. This part can be used for the front support ...

$59.10

Water Inlet Valve

The water inlet valve is also known as the water inlet valve assembly and is compatible with your refrigerator. The function of this part is to release water from the supply line when activated, and send it through to your water dispenser in your refrigerator. To make this repair you will need an adjustable wrench, a quarter inch nut driver, and a sharp utility knife. Before you begin this repair make sure to disconnect the power supply to your refrigerator, as well as disconnect the inlet water supply from the back of the refrigerator. Note that this part may appear different than the original, but is an authorized manufacturer replacement.

$4.19

Crisper Support - Rear

Replacing the rear crisper support in your refrigerator is an easy job, but to complete this repair you will need a small putty knife, a punch or a short flat blade screwdriver, an...

$8.17

Hinge Bearing

Sold individually. Also known as a short door closing cam.

$102.90

Rear-Mount Ice Maker Assembly

This kit includes the ice maker, power cord, bail arm, and fill cup. If your ice maker is not making or dispensing ice, or you notice a leak, you may need to replace the rear-mount...

$28.16

Door Closing Cam

Sold individually. This cam is located at the bottom of the fridge/freezer door.

$30.38

Dispenser Crusher Housing

This dispenser crusher housing may also be known as a refrigerator ice crusher housing, and is compatible with your refrigerator. The function of the dispenser crusher housing is t...

$14.33

Ribbon Cable Harness

Used in the dispenser board area.

$38.75

Crisper Glass Insert

$7.72

DRUM

This part helps push the ice threw the front plate to be crushed.

$7.30

Screw

This screw is sold individually.

$29.38

Pan Cover Insert

Glass Only. Frame not included.

$9.49

Upper Hinge Bearing

Can be used on either Fresh Food or Freezer side of the refrigerator.

$28.37

Evaporator Fan Blade

This evaporator fan blade is a genuine OEM part that is sourced directly from the manufacturer. The evaporator fan blade circulates air through the refrigerator to control the amount of cold air goes that goes to internal compartments of the unit. It may need to be replaced if the fridge is noisy or not cold enough. This part is made of plastic and is sold individually. It will be necessary to disconnect power to the refrigerator and empty the freezer compartment of the refrigerator. The tools needed to complete this repair are a 1/4 inch nut driver and a pair of needle nose pliers.

All Parts for the E23CS78DSS3
1-14 of 316