Models > E23CS75DSS6 > Instructions

E23CS75DSS6 Electrolux Refrigerator - Instructions

All Instructions for the E23CS75DSS6
271 - 285 of 429
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
broken valve, water puddle on the floor
removal of the old valve to identify the problem took the most time. Once the new valve came it it was easy. NOTE: the old one had threaded connectors, and the new one is press/fit so the ends of the tubing need to be cut. The color coding and size matching are great.
Parts Used:
Refrigerator Water Inlet Valve
  • Robert from Petoskey, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Wrench (Adjustable)
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The new motor mount screw holes were not threaded.
I had to tap the screw holes with a 8/32 tap so that the screws would not bind.
Parts Used:
BLADE-CONDENSER FAN
  • Greg from henrico, VA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Socket set
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken shelf support
ordered the part, watched the video....it was a snap
Parts Used:
Crisper Support - Rear
  • Jerome from Hendersonville, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker wouldn't fill
I had a repair man do the work.
That's always best.There was one day delivery on the part and the price was great. Thanks
Parts Used:
Refrigerator Water Inlet Valve
  • Robert A. from St. Augustine, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set, Wrench (Adjustable), Wrench set
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the crisper support broke
I used the paint spatula to pry out the old part and then put in the new part and pushed in the holder with my fingers. Super easy.
Parts Used:
Crisper Support - Rear
  • Bambie from Canoga Park, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice stripper was broken
I just popped the ice strpper into place and plugged the ice maker back in. Didn't need any tools..Really easy!!
Parts Used:
ICE STRIPPER
  • Kevin from Riverton, UT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My Frigidaire Drawer Broke
My Frigidaire Drawer broke... I ordered the parts and installed it within 5 min. It took more time to remove the food and drawer then it did to install the pegs.
Parts Used:
Crisper Support - Rear
  • David from Coppell, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
5 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic shelf support broke
Took out the support and put back in the new one.
Parts Used:
Crisper Cover Support - Front Crisper Support - Rear
  • Derek from Graham, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
0 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
not making ice
turned off water supply, removed cardboard back, removed supply line, unhooked all color coded connections,took out bad water valve and replaced with new one note: the new valve came with pex connections so i carefully cut off flared tubing ends with sharp razor knife making sure when i pushed tubing into new valve that i did so with some force until i HEARD and felt them snap in place very simple plus i received the new valve in 2 days very happy with PartsSelect.com you CAN do it
Parts Used:
Refrigerator Water Inlet Valve
  • mark from east greenwich, RI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Wrench (Adjustable)
0 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leaking from broken intake water line
Turned off water supply disconnected hose from valve removed cardboard backing removed the screws holding valve ass'y disconnected the three wire connections disconnected five hoses then cut and installed in new valve per instructions provided reconnected three wires reinstalled valve ass'y turned water supply back on and checked for leaks by engageing filtered drinking water in the refrigerator door replaced backing to complete job.
Parts Used:
Refrigerator Water Inlet Valve
  • Jamie from Weeki Wachee, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Socket set, Wrench (Adjustable)
0 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Glass tray was missing
My repair was a simple as logging on to the "PartSelect.com" website - very easy to find the specific part I needed. The website makes the part selection a breeze.
Parts Used:
Crisper Glass Insert
  • Susan from Phoenix, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Husband pushed water to hard and though it was the ice maker
Just pluged it in
Parts Used:
Ribbon Cable Harness
  • Thelma from Hickory, NC
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
4 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water spraying from behind refrigerator
remove back cardboard panel, cut off water supply, remove screws holding valve to back of refrigerator, unscrew water lines & reattach to same fittings on new valve, screw new valve in place, replace cardboard cover.
Parts Used:
Refrigerator Water Inlet Valve
  • mike from tampa, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench set
1 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Bracket on Door Shelf
The molded plastic bracket holder on one of my shelves was busted. It was obvious I just needed that particular part, and didn't need a full 'service technician' rigamarole. It's great to have been able to find the part online. If arrived fast and took less than 5 minutes to fix!
Parts Used:
COMPARTMENT
  • Michael from Santa Clara, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
the compressor capacitor overheated
it was great. I ordered the capacitor for my frigidaire frig and it arrived
in 3 days. plugged in the part to the compressor and my frig has been
working ever since. I spent 3 minutes ordering the part and 30 seconds
attaching it to the frig. Easy, very easy. saved myself a 75 dollar repair
visit. thanks
Parts Used:
Run Capacitor
  • Bart from goldsboro, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the E23CS75DSS6
271 - 285 of 429
Back to Top