Quick Question!

Have you ever purchased from PartSelect.com before?

Models > E23BC78IPS3 > Parts

E23BC78IPS3 Electrolux Refrigerator - Parts

All parts for the Electrolux Refrigerator E23BC78IPS3

Below is a list of all parts for the Electrolux Refrigerator E23BC78IPS3. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the E23BC78IPS3
1-14 of 341
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$59.04

Water Inlet Valve

The water inlet valve is also known as the water inlet valve assembly and is compatible with your refrigerator. The function of this part is to release water from the supply line w...

$16.62

Air Filter

This air filter system for refrigerators eliminates odors and any impurities. It does this by neutralizing and removing odor-causing molecules. For best results, it is important to change the filter every 6 months to ensure that food is kept fresh, and the humidity is controlled. This part measures about 7 inches wide and 5 inches deep. Follow installation instructions provided by the manufacturer when installing this part to ensure accurate results and further guidance. Remember to unplug refrigerator from power source before starting this project.

$0.72

Screw

$27.22

Evaporator Fan Blade

This evaporator fan blade is a genuine OEM part that is sourced directly from the manufacturer. The evaporator fan blade circulates air through the refrigerator to control the amount of cold air goes that goes to internal compartments of the unit. It may need to be replaced if the fridge is noisy or not cold enough. This part is made of plastic and is sold individually. It will be necessary to disconnect power to the refrigerator and empty the freezer compartment of the refrigerator. The tools needed to complete this repair are a 1/4 inch nut driver and a pair of needle nose pliers.

$5.88

SCREW-SHOULDER

Sold individually.

$9.43

Adjustable Leveling Foot - Black

This part could be found underneath a fridge, dryer, or freezer. The original foot may be cracked, broken, or perhaps missing altogether. If you notice the appliance is uneven to the floor or wobbling, it may indicate that the levelling foot needs to be replaced. You will need pliers and a block of wood to perform this task. There will be one adjustable foot found in the package. Lift the dryer and place the wood to keep it propped up. You may need to use the pliers to remove the old foot. Screw the new foot into place using your hand. Once the new leveling foot is in place, lift the appliance and remove the block. Test the machine out to ensure it is now sitting level.

$72.28

Water Filter Base

$6.11

Hexagonal Screw

Sold individually.

$6.19

Hinge Mounting Hexagonal Screw

Sold individually.

$30.36

Light Switch

$6.34

SCREW

Sold individually.

$4.52

Screw

10 - 32 x 0.375

$67.15

Water Filter

$26.70

Blade-condenser fan

All Parts for the E23BC78IPS3
1-14 of 341