Models > DWUA201AAE > Instructions

DWUA201AAE Admiral Dishwasher - Instructions

All installation instructions for DWUA201AAE parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dishwasher repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the DWUA201AAE
376-390 of 409
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Dishwasher would not run through complete cycle

  • Customer: Sandra K. from Newnan GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Followed the instructions provided by Parts Select. com to replaced the switches inside the door. Worked like a charm. Sandy

Water was leaking around the door

  • Customer: Paul from St. Louis MO
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Following the instructions provided on line, I replaced the door gasket

Upon taking the dishes out of the dish washer I noticed the center spray arm was broken!

  • Customer: John from Bogue Chitto MS
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
We first ordered the wrong part, but thankfully partselect was happy to return the item. I first got to say identifying the right part is a lot easier if you know what it looked like before it broke! Upon receiving the corrected part much faster than we expected (2 days on a saturday!) I began to assess the situation. I needed a star-type bit for a screw driver to remove the screws. Thankfully it was a standard size that comes in most cheap screwdriver kits. I removed the 3 screws on the round lid at the bottom that covered the piece, removed the old center spray nozzle. I then tried to put the old one on and later discovered the small plastic piece I thought was the place to mount it on was actually the old part broken. I unscrewed the old piece and put the new one on, made sure it was tight. I replaced the round lid that covered the other piece up, put the spray arm on and the center spray jet inside, screwed it down tight. Rotated the spray arm to make sure it moved freely. We then turned the dish washer on to make sure it was spinning and pumping water, etc. Everything appeared to be working fine, so we loaded it up with dishes and the dish washer washed much better than it had in the past. The dish washer came with the trailer, so we don't know how old it is for sure. We had a problem with the dishes on the top not getting washed properly if you don't load the bottom rack just right. We later noticed on a previous comment that others had a problem with the top rack not getting clean because of this part. I highly recommend this site to anyone fixing any home appliance! Lately we've been having a lot of repair expenses and this site saved us some serious money! We expected to have to buy a new dish washer, because the cost of a repairman to fix it would likely to exceed the cost of a new dish washer. We've been researching doing fix-it jobs ourself and any time we can safely repair something ourself, we try our best to do it. I especially love the breakdown of the parts. I'm not a mechanic, plumber, etc. I am a Ham Radio Operator who used to work as a Cashier. I don't know what you call all the parts, and some I have no clue what they do, but I can look at the picture and find a part that looks like what I need! I can look at the break-down page and see what must be removed to get to the part. In short, I'm an average guy who used the information available to me to fix the dish washer myself. When a company like partselect can enable a average guy to repair something for a fraction of the cost of paying a professional, that's definitely an innovative idea! A lot of the instructions on this site really lack the description of how to fix it. Granted, this job, once you look at it is incredibly simple! The only thing I have to say is make sure you have a star bit to take off the screws before you begin. Having the right tools to begin makes it go much quicker.

Leaking water on floor, right side

  • Customer: Arthur from Aitkin MN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
Removed gasket using needle-nose pliers, replaced with new gasket using just my fingers, process took a few minutes. Leak is gone.

dishwasher gasket worn out.

  • Customer: Barbara from Yorba Linda CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Gasket on my Maytag dishwasher was not making a good seal. I found PartSelect online. Entered my model number and make. Placed my order and received it the next day. The cost of the part reasonable. The website user friendly. Love PartSelect.

RINSE AID CAP DAMAGED

  • Customer: Eugene from New Rochelle NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
BOUGHT REPLACEMENT CAP FROM PARTSELECT WITH EXCELLENT ASSISTANCE FROM CUSTOMER SERVICE REP SHARON F.

Water leak in the door. Old casket

  • Customer: John from Conroe TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
It took less then 10 minutes to rplace the new gasket. I think that Maytag is way ahead of the competion on this. The Dishwasher is now back to working and no more leaks.

Dishwasher would not work

  • Customer: Joseph from DeBary FL
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
My wife was visiting her parents in Ecuador and she relayed back to me that their dishwasher was inoperative. She explained the situation and I researched the problem with Parts Select. The solution was simple, since Parts Select had an array of extremely helpful step by step repair instructions. I sent her the link, ordered the door switches, and she did the repair by viewing the video. It was an outstanding, effortless experience! Thanks to Parts Select, not only was the parts inexpensive, but instruction videos are to the tee!

Would not dispince soap

  • Customer: J. Robert from Rensselaer NY
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed inside door cover, removed wire connections, & removed what I would call a solenoid device. Then installed new one.

leaking water

  • Customer: CLAIRE from WINTHROP MA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I took out the old gaskets and replace them after I clean and dried them. very easy. I'm a woman and if I can do it anyone can. Although I used the parts it did not fix the problem. So with help of parts select I'm on to the next solution. They're great fast fast on your supplies.

Broken wheel on upper rack and missing rack stops

  • Customer: Robert from Madison AL
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
Bought extra parts incase I messed up. Fitted the wheel to the rack fairly quickly. Had to remove one rack stop, with a pair of pliers, in order to completely remove the rack from the moveable tracks. Folded over one of the rack stops and locked it in place completely. This is the wrong thing to do as it will not slide into the end of the moveable track. The trick is to partially fold the rack stop and start it into the moveable track. Then when the rack stop is inside the moveable track you can finish completing the folding of the rack stop. Once folded completely it is impossible to get the part unfolded.

Dishwasher not washing

  • Customer: beverly from saylorsburg PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Underneath the drum, behind the bottom face plate, you will find the solenoid with a return arm and spring. It is close to the front of the dishwasher- Just remove the spring and replace it with a new one using needle nose pliers to reconnect. If your dishwasher is filling with h2o and then draining the water without washing this could be your problem. This spring holds the lifter arm, inside the bottom of the drum, in the right possition to make the dishwasher (wash). A cheap fix as art was less than $4.00. Happpy Fixing!

Dishwasher leaking at bottom of door.

  • Customer: William from Kennewick WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I followed the video provided with the Order Acknowledgement. Very Very simple and easy to do. This is without a doubt the best company I have ever dealt with online. Prompt, quick delivery and very professional. The only mistake I made was not ordering the O ring for the soap dispenser. I am in the process of ordering that right now. This is the go 2 place for appliance repairs for sure. You won't be disappointed in any way.

Dishwasher leaking from door

  • Customer: Marlon from Hamilton GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Ordered parts on Saturday, and they arrived Tuesday. Followed the instructions in the video. It could not be easier. I may turn pro when I retire.

The gasket is press fit in a channel around the door

  • Customer: Roy from Shoreline WA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Orient the gasket so that the more squishable hollow side of the gasket faces the door, and check that the length is sufficient to fill ths entire channel. The less compressible side goes into the channel, which requires some skill and strength to seat well. The flat portion of the more or less square gasket has two edges to it. What works best is to put the edge that is toward the inside of the dishwasher into the channel with your fingers, and then press in the other edge firmly with the small spatula of about 2 or 2and 1/2 inches until you can no longer see that edge. This is the visual indication it is seated. in the corners you may only be able to use a corner of the spatula.
All Instructions for the DWUA201AAE
376-390 of 409