Models > DWU8750BAE

DWU8750BAE Maytag Dishwasher - Overview

Get Parts and Repair Help for DWU8750BAE

If you know the dishwasher repair part you need, you can browse the list of all parts on the DWU8750BAE, or you can search by name or part description. You can also find your part by where it is located on the DWU8750BAE by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for DWU8750BAE parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$12.18

Silverware Basket - Gray

This part has been redesigned by the manufacturer and is now a complete full basket with handle and covers.

$3.71

Lower Wheel Assembly

Sold individually.

$47.25

Door Gasket

This door gasket can be installed by simply pressing it into the channel around the door.

$3.76

White Dishrack Roller with Axle

Sold individually.

$3.81

Dishrack Guide Rail Stop

This part is sold individually.

$3.51

Door Spring Linkage

This part provides more flexibility for the door spring.

$22.09

Inner Door Foam Insulation Strip

Helps prevent leaking from the door area.

$156.01

Upper Dishrack with Wheels

This rack comes complete with four attached wheels and the rack may differ in appearance, but will function same as original part.

$2.70

Hose Clamp

$31.80

Door Switches and Holder Assembly

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Water dripping from right corner of door

  • Customer: Tim from Ringgold GA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 481 of 484 people found this instruction helpful
Took out about 7 torx screws to remove the inner door liner. Discovered evidence of leak coming from the sop dispenser latch, and noticed the grommet had turned soft and was torn. The grommet is only about 1" square. Used nut driver to remove two screws to remove latch assembly. Slipped old grommet off and put new one on, and reattached the latch. The foam s... read more

Rack roller broke

  • Customer: Kathy from Lombard IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 461 of 462 people found this instruction helpful
I opened the end stop of the rack, replaced the roller, and put the end stop back on. I can't believe I paid the repairman the last time $125????? An he put in a regular screw that rusted and broke the roller. Took me 3 minutes! Thanks read more

Water Leak at right side bottom of the dishwasher door

  • Customer: Bernard from Williamsport PA
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers, Socket set
  • 389 of 393 people found this instruction helpful
After dissassembling the unit to discover the leakage source I determined that it would do best to replace the top three contributors to the problem as listed by you. Disassembly, parts replacement and reassembly was straight forward and a few hints garnered from your good instructions and assembly blow-up drawings made the job simple with the most difficul... read more