DWU4910BAX Maytag Dishwasher - Instructions

Simply took out the old basket and put in the new basket. Fits beautifully.

Mice were living behind and on top of the dishwasher and destroyed the pad. Had to throw it away. Ordering you was easy, and the pad fit perfectly.

This is almost a joke. It took 5 seconds to remove the old silverware basket by lifting it from the bottom Rack. Then I spent another 5 seconds to lower the new basket onto the lower rack of the dishwasher. I was a little miffed because the new basket did not match the photo on the Parts Select website, which photo seemed to match the old basket exactly. However it fits, and the wife likes the design of new one better than the old one.

I removed the top rack and looked at the other rail to figure out how the stop should fit into the rail....had to reinstall the rail and rack and reach in from below the rack with the rail extending past the rollers.....took me a little while to figure it out but it worked great.....repair less than $12. ($4 for the part and $7 for shipping the part).

Took old basket out put new one in.

I followed the video provided with the Order Acknowledgement. Very Very simple and easy to do. This is without a doubt the best company I have ever dealt with online. Prompt, quick delivery and very professional. The only mistake I made was not ordering the O ring for the soap dispenser. I am in the process of ordering that right now. This is the go 2 place for appliance repairs for sure. You won't be disappointed in any way.

Ordered parts on Saturday, and they arrived Tuesday. Followed the instructions in the video. It could not be easier. I may turn pro when I retire.

Orient the gasket so that the more squishable hollow side of the gasket faces the door, and check that the length is sufficient to fill ths entire channel. The less compressible side goes into the channel, which requires some skill and strength to seat well. The flat portion of the more or less square gasket has two edges to it. What works best is to put the edge that is toward the inside of the dishwasher into the channel with your fingers, and then press in the other edge firmly with the small spatula of about 2 or 2and 1/2 inches until you can no longer see that edge. This is the visual indication it is seated. in the corners you may only be able to use a corner of the spatula.

Followed the video instructions. Couldn't have been easier. Bought 2 extras for the inevitable breakdown of others.

Installed a new grommet on the soap door latch. Replaced door seal at customer request. The door seal ordered was to short. Replaced door spring clips at customer request. Split the door, remove 2 screws from inside the inner panel, grommet is between the inner panel and latch mechanism. Line the new grommet before install.

unscrewed 7 torx screws with the impact driver. removed the motor from the bracket. comes out pretty easily. moved wires aside. Pulled the wires off the motor using the pliers- one came off very hard, note where they go, corroded in place. installed the new motor by easily re-attaching the leads. Biggest surprise was that there were 2 motors. I initially replaced the lower one which did not solve the problem. When I replaced the upper, it worked. Not sure of the function of the lower motor. The upper one clearly fits into a slot which seems to attach to the doors.

After ordering pasrts, which were shipped quickly--watch the free how to video you had on line. What an assist. It made all the difference. Thanks for such good help

Ordered a new part and simply placed it in where the old part was, make sure you have measured the dimensions of your space, includes a handle for easy lifting, and snap doors for small accessories

This replacement basket fit perfectly, is well made, and came speedily, as promised!

Take out old basket throw it away. Put in new basket. time: 20 seconds. It took longer to open the package. I'm guessing at the brand, and I'm not going to my other house to find out.