Models > DWSR483EG3WW > Parts

DWSR483EG3WW General Electric Dryer - Parts

All parts for the General Electric Dryer DWSR483EG3WW

Below is a list of all parts for the General Electric Dryer DWSR483EG3WW - ELECTRIC DRYER. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the DWSR483EG3WW
15-28 of 93
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Cycling Thermostat - 4 Wire

This thermostat helps to regulate the dryer's internal temperature. L210-30F


Drum Bearing Sleeve

Sold individually.


Retainer O-Ring




Heating Element and Housing

Note: The insulators on the housing are NOT sold separately.



This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.


Door Strike


Door Switch

A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.




Adjustable Leveling Screw


Safety Thermostat

This is considered a thermal fuse.


Terminal Block and Grounding Strap

This part is connected to the rear bulkhead of the dryer with screws. It provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).


Nut Cap



If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered.

All Parts for the DWSR483EG3WW
15-28 of 93