DWC7400AAW Maytag Dishwasher - Instructions

Ordered parts on Saturday, and they arrived Tuesday. Followed the instructions in the video. It could not be easier. I may turn pro when I retire.

Orient the gasket so that the more squishable hollow side of the gasket faces the door, and check that the length is sufficient to fill ths entire channel. The less compressible side goes into the channel, which requires some skill and strength to seat well. The flat portion of the more or less square gasket has two edges to it. What works best is to put the edge that is toward the inside of the dishwasher into the channel with your fingers, and then press in the other edge firmly with the small spatula of about 2 or 2and 1/2 inches until you can no longer see that edge. This is the visual indication it is seated. in the corners you may only be able to use a corner of the spatula.

Followed the video instructions. Couldn't have been easier. Bought 2 extras for the inevitable breakdown of others.

Installed a new grommet on the soap door latch. Replaced door seal at customer request. The door seal ordered was to short. Replaced door spring clips at customer request. Split the door, remove 2 screws from inside the inner panel, grommet is between the inner panel and latch mechanism. Line the new grommet before install.

unscrewed 7 torx screws with the impact driver. removed the motor from the bracket. comes out pretty easily. moved wires aside. Pulled the wires off the motor using the pliers- one came off very hard, note where they go, corroded in place. installed the new motor by easily re-attaching the leads. Biggest surprise was that there were 2 motors. I initially replaced the lower one which did not solve the problem. When I replaced the upper, it worked. Not sure of the function of the lower motor. The upper one clearly fits into a slot which seems to attach to the doors.

After ordering pasrts, which were shipped quickly--watch the free how to video you had on line. What an assist. It made all the difference. Thanks for such good help

Ordered a new part and simply placed it in where the old part was, make sure you have measured the dimensions of your space, includes a handle for easy lifting, and snap doors for small accessories

This replacement basket fit perfectly, is well made, and came speedily, as promised!

Take out old basket throw it away. Put in new basket. time: 20 seconds. It took longer to open the package. I'm guessing at the brand, and I'm not going to my other house to find out.

Repair was super easy. Once we got on Part Select, we ordered the part. I got an email hours later saying it was shipped and recieved the next day. Super fast delivery.

I opened the door of the dishwasher, pulled out the old silverware basket, and then placed the new silverware basket where the old one was. The whole time, I was imagining how much it would be to call up and appliance repair guy and have him do this.

simply replaced the ring and the water inlet injector, no tools need on that part of the repair

Lifted old one out. Set new one in.

Was so easy. I am an old grandmother. I looked for parts for the dishwasher and happened on this site. When describing the problem, I said "won't start". The part number came up and I bought it. Took about 3 days for part to arrive and less than 15 min to install. So easy and if I had problems there was a step by step guide on internet. I am 100% satisfied and recommend for anyone even if you are not handy.

Go to computer, log onto PartSelect, order part. Two days later, go to mailbox, open package. Go back to computer, log onto PartSelect, watch instructional video on how to install the part. Go to kitchen, do what the video showed you to do. Job done.