Models > DWA73AL (P1318614W)

DWA73AL (P1318614W) Amana Dishwasher - Overview

Get Parts and Repair Help for DWA73AL

If you know the dishwasher repair part you need, you can browse the list of all parts on the DWA73AL, or you can search by name or part description. You can also find your part by where it is located on the DWA73AL by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for DWA73AL parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the DWA73AL [Viewing 6 of 6]

$2.70

Hose Clamp

$2.70

Hose Clamp

This hose clamp is sold individually.

$2.70

Screw

This screw is sold individually.

$17.28

Heavy Duty Door Spring

Bottom Door Gasket

*Gap in seal to allow for airflow in the dry cycle.

$17.55

Linkage Spring

$100.88

Handle and Door Latch Assembly with Switches

This door latch with the switches is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open.

$55.79

Water Inlet Valve

This part may appear different than the original, but is deemed a functional equivalent.

$120.02

DISPENSER

HOSE- DRAI

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Door Springs worn

  • Customer: Ester from LA QUINTA CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 4 of 5 people found this instruction helpful
First: I unplugged the dishwasher.

Second: I removed the two screws that hold the dishwasher in place under the counter.

Third: I pulled the dishwasher out in order to see the sides of the doors where the springs hold the door attached to the dishwasher.

Fourth: I removed the worn springs with needle nose pliers.

F... read more

Springs that held up door were broken

  • Customer: Nydia from Howell NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 2 people found this instruction helpful
I unscrewed the dishwasher brackets (2 of them) from under the counter, slid out the dishwasher. The springs (or broken springs) were visible. I removed them, popped the new ones in and viola!!! The door sprung up like it was new. Of course I slid the dishwasher back under the counter and put the screws back in. This took 15 minutes. I couldn't believe ... read more

Broken dishwasher door spring

  • Customer: John from West hurley NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 1 of 1 people found this instruction helpful
Remove the screws securing dishwasher to cabinetry; slide the machine out; hook spring into chassis; stretch spring using pliers and attach to arm on washer door. Push the machine back into place, replace screws. Very easy. The spring was delivered in about two days. Piece of cake. read more