Models > DW730W Maytag

DW730W Jenn-Air Dishwasher - Overview

Get Parts and Repair Help for DW730W

If you know the dishwasher repair part you need, you can browse the list of all parts on the DW730W, or you can search by name or part description. You can also find your part by where it is located on the DW730W by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for DW730W parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$13.41

Silverware Basket - Gray

This part has been redesigned by the manufacturer and is now a complete full basket with handle and covers.

$47.25

Door Gasket

This door gasket can be installed by simply pressing it into the channel around the door.

$3.76

White Dishrack Roller with Axle

Sold individually.

$2.70

Hose Clamp

$2.92

Short Hinge Pin

$3.83

Hinge Pin

Sold individually.

$2.70

Screw

$21.41

Wax Motor for Detergent Cup Actuation

This motor is for the rinse aid and detergent cup actuation.

$18.07

Float Switch

Water that fills your dishwasher lifts this float. When it reaches a certain level, the float triggers the float switch to shut off, thereby shutting off the flow of water into th...

$3.51

Soap Cup Door Latch and Gasket

Please Note: A bad gasket is one of the causes for a door leak.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Water dripping from right corner of door

  • Customer: Tim from Ringgold GA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 471 of 473 people found this instruction helpful
Took out about 7 torx screws to remove the inner door liner. Discovered evidence of leak coming from the sop dispenser latch, and noticed the grommet had turned soft and was torn. The grommet is only about 1" square. Used nut driver to remove two screws to remove latch assembly. Slipped old grommet off and put new one on, and reattached the latch. The foam s... read more

bottom rack needed replacing

  • Customer: Cheryl from South Burlington VT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 464 of 468 people found this instruction helpful
Just took it out of the box and slid it in.
Only problem I encountered, and I think it was due to the age of the dishwasher, was the newunit was not as deep as teh original rack. This will require a new method of loading dishes. Also, the new basket doesn't really fit well in the new rack.
Still cheaper than replacing a good cleaning dishwasher! read more

Rack roller broke

  • Customer: Kathy from Lombard IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 460 of 461 people found this instruction helpful
I opened the end stop of the rack, replaced the roller, and put the end stop back on. I can't believe I paid the repairman the last time $125????? An he put in a regular screw that rusted and broke the roller. Took me 3 minutes! Thanks read more