Quick Question!

Have you ever purchased from PartSelect.com before?

Models > DV409AER/XAA-0000

DV409AER/XAA-0000 Samsung Dryer - Overview

Get Parts and Repair Help for DV409AER/XAA-0000

If you know the dryer repair part you need, you can browse the list of all parts on the DV409AER/XAA-0000, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$26.48

Drive Belt

The drum belt attaches to the motor pulley and causes the drum to spin as the motor is rotating. The drum belt is made of black rubber. This is an easy repair and should only take ...

$9.83

THERMISTOR;N3S1-K41-S1,1

This is a thermistor, also known as a dryer thermistor. The thermistor is attached to the blower housing, it will help regulate and oversee the temperature within the dryer. The most common symptom of needing a new thermistor is the dryer cycle not working. Before installing this part, you should disconnect your dryer from its power source. We also recommend you wear work gloves to protect your hands during this installation. To make this repair, the tools you will need include a multi-screwdriver, a Phillips head bit, and a flat-head bit.

$11.21

THERMOSTAT;PW-3V,AC125/2

This thermostat is a genuine OEM part and is manufacturer-approved for electric dryers. The thermostat is responsible for monitoring and maintaining the temperature inside the drye...

$71.97

Heating Element - 5300W

This dryer heating element produces heat to dry clothes in a dryer and is located in the rear end. If the heater element is burned, dryer does not heat or over heats, or clothes take too long to dry, then replacing this part could solve your problem. The tools needed for this repair project are: Phillips screwdriver, putty knife, needle nose pliers. To repair, first remove the main top of dryer and remove ground strap at the rear. Next, disconnect two wire harnesses that hold front panel to the cabinet to pull out front panel. Once you have access to the inside of the dryer, refer to the manual for further installation instruction. As a safety precaution, remember to unplug appliance from power source before beginning this repair project.

$21.29

High Limit Thermostat - L260-50F

The high limit thermostat is designed for use in your dryer. The function of this part is to make sure that your dryer does not get too hot. If your dryer is not regulating heat pr...

$24.14

Drum Support Roller & Axle

The drum support roller and axle, which includes the roller shaft and mounting clips, is used in dryers. This part holds the drum as it rotates on the support wheels. When the roller begins to wear out, it self lubricates, so no additional grease is needed. If your dryer is making odd noises then checking and replacing the rollers can be the solution to your problem. Make sure to unplug the dryer from the power source before beginning this replacement. Refer to the diagram and installation instructions provided by manufacturer.

$12.54

Leveling Leg

The leveling leg on your dryer attaches to the bottom of the dryer base. The function of the leg is to keep your dryer level while it operates. This part is approximately 3 inches ...

$296.22

Drum Assembly

The drum assembly is designed for use in your dryer. The drum is the part of the dryer that tumbles the clothing. If you notice that your dryer is loud during operation, or that the drum is damaged, you may need to replace it. In order to complete this repair, you will need to remove the front panel as well as the control panel, so you can remove the drum. To do this you will need a Phillips screwdriver. This part is sold individually. This is an OEM part sourced directly from the manufacturer.

$11.21

Thermal Fuse

The thermal fuse measures the air temperature inside your dryer drum, and turns the heat on and off to maintain the optimal temperature during the drying cycle. If your dryer will ...

$6.89

ROLLER-IDLER;WINGS-DRYER

Common Symptoms of the DV409AER/XAA-0000

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The dryer shut itself off and displayed error code TO

  • Customer: Leslie from Frederick, MD
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Took off the back of the dryer and replaced the thermistor. A $7 part that would have been a couple hundred dollars if we had to call a repairman. read more