Models > DUS204 19

DUS204-19 (DUS20419) Caloric Dishwasher - Overview

Get Parts and Repair Help for DUS204-19

If you know the dishwasher repair part you need, you can browse the list of all parts on the DUS204-19, or you can search by name or part description. You can also find your part by where it is located on the DUS204-19 by selecting a section below. We’ve also included any installation videos we have for DUS204-19 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.27

Heating Element Brass Nut

This nut is sold individually. It is used to install the heating element.

$4.11

CLAMP

NUT, SCREW

$386.34

LOWER RACK

$18.45

SCREW

$6.50

WASHER

SILVERWARE BASKET

END CAP, RACK SLIDE

$2.77

WASHER

$43.29

Baffle Plate and Seal

This baffle plate and seal gasket deflects water and keeps it from seeping out of the bottom of your D&M design dishwasher. It fits models with a door measuring 21-3/4 inches wide. Use it for your Frigidaire/WCI brand washing machine.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Water leaking under the dishwasher

  • Customer: Dennis from Tryon NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Wrench(Adjustable)
  • 32 of 34 people found this instruction helpful
I looked under and found that 2 brass nuts that secured the heater element through the base housing of the dishwasher has split down each side of the nut and no longer was tight enough to keep water from leaking around either end of the heater element. I powered down the dishwasher at the circuit breaker and then reached under the dishwasher and pulled away... read more

Water leak underneath dishwasher

  • Customer: Richard from New Orleans LA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers, Wrench(Adjustable)
  • 7 of 8 people found this instruction helpful
Unplugged dishwasher, removed the 2 wires clipped to the heating element, removed both cracked nuts, replaced with new nuts from PartSelect, clipped on wires, plugged in and did a test cycle. Based upon service quote from Best Buy, I saved myself $125.00 for just the call out, not including parts and labor. read more

Dishwasher was leaking

  • Customer: Tony from Lavallette NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 2 of 2 people found this instruction helpful
I turned the power off at the circuit breaker. I then took the access panel off the dishwasher at the bottom. I pulled the wire off the connector. I used a plied to remove the broken washer and replaced with new part. I put everything back in reverse order and ran the dishwasher. I than checked for leaks over two days while the machine was running and e... read more