The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack s...
$7.71
In Stock
Order within the next 7 hrs and your part ships today!
This dishwasher lower spray arm seal, or under spray arm bearing ring, is designed with the split by the manufacturer. It is not damaged or defective, and is sourced directly from the original manufac...
$16.00
In Stock
Order within the next 7 hrs and your part ships today!
This spray arm nut is used in dishwashers and works as the retaining nut for the lower dishwasher spray arm. The nut makes sure the lower spray arm is secured to the pump housing. If your spray arm is...
$8.00
In Stock
Order within the next 7 hrs and your part ships today!
This gasket wraps around the sides and top of the dishwasher door and helps seal the door when it is closed to prevent water from leaking from the dishwasher during the washing cycle. If your dishwash...
$68.77
In Stock
Order within the next 7 hrs and your part ships today!
This dishwasher drain and wash impeller kit comes with both the drain and wash impeller, gaskets, chopper, and installation screw. This part helps stop your dishwasher from leaking and helps with the ...
$109.17
In Stock
Order within the next 7 hrs and your part ships today!
The rubber washer is a part which is specific to dishwashers and should not be substituted by a similar part. It works with the heating element to seal the receptacle opening where the heating element...
$7.76
In Stock
Order within the next 7 hrs and your part ships today!
The dishwasher lid spring helps open the dispenser cover in the soap box when the control releases the latch. If your dishwasher does not dispense detergent, is broken and worn out, or the door is not...
$7.95
In Stock
Order within the next 7 hrs and your part ships today!
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
$11.80
In Stock
Order within the next 7 hrs and your part ships today!
This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of wat...
$55.46
In Stock
Order within the next 7 hrs and your part ships today!
This cap does not require the use of an O-ring seal. The wet agent assembly cap is clear in color and made of plastic. This is a part for your dishwasher. This part may need to be replaced if you noti...
$11.10
In Stock
Order within the next 7 hrs and your part ships today!
The lid hinge pin or detergent lid pin on your dishwasher helps dispense your dish detergent when your dishwasher is running. The pin fits with the dispenser lid and allows the lid to pop open and dis...
$13.01
In Stock
Order within the next 7 hrs and your part ships today!
Questions And Answers for DU945PWPQ0
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Donna
May 18, 2023
how would i know if the thermal fuse on the front panel is my problem on whirlpool dishwasher?
For model number DU945PWPQ0
Hi Donna, thank you for reaching out. Based on our understanding of the issue, we would suggest you check the thermal fuse, part number PS382828, for continuity. Using a digital multimeter rotate the dial to the lowest setting of resistance. Then, use one probe to touch one of the appliance terminals, and the other probe to touch the other terminal. If the reading is zero Ohms then the fuse has continuity. If the display doesn’t change then there is no continuity. The absence of continuity means the fuse has blown out and needs replacement. We hope this information helps!
Where is the filter for this dishwasher so I can clean it
For model number DU945PWPQ0
Hi Jane,
Thank you for your question. The filter for your dishwasher part of the motor and pump assembly and it is located under the lower spray arm. To access the filter, you will need to remove the lower spray arm. We hope this helps!
Removed spray arm thumb nut. Removed spray arm. replaced worn and broken earings and re-assembled in reverse order. Would have done the repair a lot sooner if I had known that PartsSelect was just a few miles up the highway.
Installed new door seal. Dishwasher still leaked. Googled the model number and then cleaned the filter at the bottom of the dishwasher, still leaked. Verified that manifold bearing was not work. It was OK. Found note that a plugged vent might cause leaking door. Very counterintuitive. Pried off air vent cover. Vent was tho
... Read moreuroughly plugged with calcium deposts from steam. Cleaned these out. Dishwasher no longer leaks.