Models > DU466

DU466 Jenn-Air Dishwasher - Overview

Parts and Repair Help for models starting with DU466

If you know the dishwasher repair part you need, you can browse the list of all parts for models starting with DU466, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Models starting with DU466

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.70

Screw

This screw is sold individually.

$2.70

Screw

This screw is sold individually.

$2.70

Screw - 6-32 x 5/16

$26.84

Cable & Eyelet

This part helps hold the door in place.

$4.36

CLAMP

$2.70

Ground Screw

$49.85

COVER- DET

$43.64

WHEEL

$4.46

SCREW

Tub Baffle - left side

This tub baffle is two inches long. It is all black in color and is made entirely of plastic. This baffle is intended for use with some dishwashers.

Common Symptoms of models starting with DU466[Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Spring that holds door closed

  • Customer: Bessie from Fruitland Park FL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 4 of 8 people found this instruction helpful
First, removed screws on bottom panel. On this model, everything was easy to see. Did not have to move the appliance at all. The left side wire was broken. Just removed the broken part, connected the new wire, and then the springs to it. No problem at all. Took about 15 mins. read more

WOULDN"T DRAIN THE WATER COMPLETEY

  • Customer: clarence from ST LOUIS MO
  • Difficulty: Really easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers
  • 2 of 3 people found this instruction helpful
removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires...) read more

Two upper rack rollers were broken

  • Customer: Duane from Seattle WA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 2 people found this instruction helpful
Used ascrewdriver to bend the metal rail that the roller rolls on. The part that needed to be bent holds the end cap on. Once bent, the end cap pops off. The the old roller can be removed and the new roller instsalled. The rail then needs to be re-bent. read more