DU24J2C Maytag Dishwasher - Instructions

Ordered gasket 13 may, received in mail 27 may. Enlarged instructions for easy reading. Removed sliding drawers from inside dishwasher removed door panel and panel at bottom of door to expose nut holding bottom clip removed philips head screw holding bottom clip and used flat blade screw drive to pull gasket fasteners (clips) holding old gasket in place. Removed old gasket. Installed new fasteners on new gasket, did not need to use plyers to install clips installed gasket junction wire at bottom of gasket and formed gasket to fit dishwasher, installed new gasket on fasteners in dishwasher used handle end of screwdriver to push clips in place, reinstalled new bottom wire clip and used 1/4 in ratchet with socket to secure nut on end of screw holding bottom clip in place. Put slideing drawers back in dishwasher door closed and latched ok so I washed a small load of dishes to check for water leak. No water leak reinstalled door panel and bottom panel on dishwasher.

Followed instructions, those were OK.
Dishwasher front still leaking

I removed all of the clips, that held the rubber seal inside the basket. I then replaced the new rubber seal with new clips. Very easy. The instructions were very helpful.