Quick Question!

Have you ever purchased from PartSelect.com before?

Models > DU24D2 > Parts

DU24D2 Maytag Dishwasher - Parts

All parts for models starting with DU24D2

Below is a list of all Maytag Dishwasher parts for the models starting with DU24D2. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

Models starting with DU24D2

All Parts for models starting with DU24D2
1-14 of 231
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.02

Screw

This screw is sold individually.

$3.52

Heating Element Brass Nut

The heating element nut is used to connect the heating element to the dishwasher tub. If water is leaking from underneath your dishwasher, you may need to tighten or replace the heating element nut. Replacing the nut is an easy job, does not require any specialty tools, and should not take you more than 10 minutes. For our step by step guide, click the video below. The brass nut measures 7 inches in length x 1 inch in width x 5 inches in height, and fits most dishwashers. To see if this part is compatible with your dishwasher, check the list of compatible brands below.

$5.51

Hose Clamp

The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washe...

$3.40

GROMMET

This grommet is used in a number of household appliances. Most often it is used in the dishwasher as part of the assembly that mounts and holds the heating element in place. This replacement part is made out of rubber, which helps create a seal between the element and the appliance. This grommet is sold individually. If you are replacing the heating element, or the brass nut that holds it in place, we recommend you replace the grommet at the same time. Before you begin any repair work on your dishwasher, make sure you have unplugged it and shut off the water supply.

$5.10

Screw, 8/18 x 3/8

This screw is sold individually.

$10.69

Silicone Adhesive

This adhesive is made specifically to attach dishwasher tine tips (the pointy parts of the dish rack) and door gaskets (when necessary). This adhesive is white silicone and is also known as adhesive caulk. One tube is approximately 3 oz. of product. This adhesive provides a heat-resistant seal between workings. Before applying the adhesive, ensure the surface is clean, dry, and does not have any grease or oil on it. For safety, wear gloves when working with this adhesive to ensure it does not come into contact with your skin.

$3.75

Screw

This screw is sold individually. Size: 8-32 x 1/4 inch.

$3.02

Screw - 6-32 x 5/16

This screw is well under an inch long, and is made of metal.

$4.22

O-RING

$5.86

CLAMP

$15.05

ROLLER

$9.60

Nut

This part is sold individually. This nut can be found in various appliances including a dishwasher, air conditioner, washer, dryer, range/cooktop, oven, freezer, range hood, and refrigerator. There is a serrated pattern along the edge of the nut, which helps to avoid loosening while the appliance is in motion. Nuts may corrode or rust over time and will need to be replaced. You will need a wrench to screw the nut into place. This genuine OEM part comes directly from the manufacturer.

$30.51

Lower Rack Roller Assembly

This assembly includes the 2 wheels and bracket.

$3.40

Dishwasher Door Spring

Sold Individually. Suggested to replace both at the same time.

All Parts for models starting with DU24D2
1-14 of 231