Models > DU1000CGQ1

DU1000CGQ1 Whirlpool Dishwasher - Overview

Get Parts and Repair Help for DU1000CGQ1

If you know the dishwasher repair part you need, you can browse the list of all parts on the DU1000CGQ1, or you can search by name or part description. You can also find your part by where it is located on the DU1000CGQ1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for DU1000CGQ1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$28.56

Middle Spray Arm Kit

This kit has been redesigned. The supply tube is now one piece. This spray arm kit comes with an upper spray arm, holder, water supply tube and a screw. This kit does NOT inclu...

$4.01

Upper Spray Arm Mount

**Please note: This is a redesigned part. The top mounting clip and screw are no longer needed.

$3.96

Wash Arm Bearing Ring

This part will fit between the newer type lower wash arm and the wash arm retainer nut of your dishwasher.

$3.81

Spray Arm Seal

This white under spray arm bearing ring is designed with the split. This is not a defective or damaged item.

$4.01

Wash Arm Retainer Nut

Use this part to secure the lower spray arm of your dishwasher.

$33.52

Drain and Wash Impeller Kit

This dishwasher drain and wash impeller kit comes with both the drain and wash impeller, gaskets, chopper and installation screw. This part helps stop your dishwasher from leaking and helps with the proper draining of the dishwasher.

$3.96

Rubber Washer

Sold individually. Used with the heating element.

$3.71

Lid Spring

This metallic spring is for your dishwasher's soap cup cover.

$3.96

Lid Hinge Pin

$50.61

Door Gasket

It provides a waterproof seal between the tub and the door.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Not Cleaning lightly soiled items.

  • Customer: Dennis from Cromwell CT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 365 of 367 people found this instruction helpful
Removed spray arm thumb nut. Removed spray arm. replaced worn and broken earings and re-assembled in reverse order. Would have done the repair a lot sooner if I had known that PartsSelect was just a few miles up the highway. read more

Lower spray arm was not turing properly and causing poor wash results

  • Customer: Robert from York PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 114 of 178 people found this instruction helpful
I noticed the upper bushing washer was worn thin. this caused the lower spray arm to rise too high and wobble during all the wash cycles. Also the rotation of the lower spray arm was wearing grooves in the lower bushing.

I removed the retaining nut and simply replaced teh defective parts. While I was at it I figured equal wear might be evident... read more

lower wash arm was not moving freely

  • Customer: Beverly from Bly OR
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 70 of 70 people found this instruction helpful
I first removed the wash arm retainer nut then lifted the arm assembly out and replaced the spray arm bearing ring and then set the spray arm back in place and put the wash arm bearing ring in the hole and screwed the wash arm retainer nut back in place. I couldn't believe how much the 2 had worn down. It is working fine. Saved me about a $125.00 service ... read more