Models > DTS18XBSARWW

DTS18XBSARWW General Electric Refrigerator - Overview

Get Parts and Repair Help for DTS18XBSARWW

If you know the refrigerator repair part you need, you can browse the list of all parts on the DTS18XBSARWW, or you can search by name or part description. You can also find your part by where it is located on the DTS18XBSARWW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for DTS18XBSARWW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the DTS18XBSARWW [Viewing 3 of 3]

$2.52

Light Bulb - 40W

Sold individually.

$53.57

Evaporator Fan Motor

This evaporator fan motor is located in the back of the freezer and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.

$2.23

Evaporator Fan Grommet - Red

$9.20

Door Fixed Shelf

$7.27

Door Fixed Shelf - White

$44.43

Vegetable Drawer Shelf Frame

Frame only. Glass NOT included.

$2.87

Evaporator/Condensor Fan Grommet

$1.53

Compression Ring

$20.09

Run Capacitor

This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.

$11.93

Package of 12 Screws

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Freezer Fan

  • Customer: Luis from College Station TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 75 of 78 people found this instruction helpful
I removed two srews from the back panel inside fthe reezer compartment and the two that hold the air manifold/baffle? and pulled the baffle out. Then, I removed the two srews that hold the front part of the fan bracket behind the baffle and the back panel came out easily. Two more screws and one quick connect plug attached to the fan and I was done with remo... read more

Sticking Light Switch

  • Customer: Jonathan from Lilburn GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 34 of 38 people found this instruction helpful
I applied some tips learned by reading other reviews. So before I started I grabbed my trusty vise grip pliers and a small screw driver. I locked onto the switch actuator, the part that the refrigerator door pushes in, with the vise grips and pulled on it just hard enough to get the screw driver inserted in the right side to push in the catch clip so the swi... read more

Refrigerator had a blown Overload PTC

  • Customer: Paul from Stillwater MN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 36 of 47 people found this instruction helpful
I indered the right part. The hardest aspect of the repair was finding any information about what wire to attach where. There is one orange and one black wire that goes into the PTC from the fridge.
After speaking with an appliance expert at a local appliance store (not where I bought the part) they helped me out.
Next time, I would just pay the... read more