Quick Question!

Have you ever purchased from PartSelect.com before?

Models > DTS18ICSURBB

DTS18ICSURBB General Electric Refrigerator - Overview

Get Parts and Repair Help for DTS18ICSURBB

If you know the refrigerator repair part you need, you can browse the list of all parts on the DTS18ICSURBB, or you can search by name or part description. You can also find your part by where it is located on the DTS18ICSURBB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for DTS18ICSURBB parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.88

Light Bulb - 40W

This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these repla...

Order within the next 5 hrs and your part ships today!
$155.85

Ice Maker

This is a replacement ice maker kit, it is used in the freezer section of your refrigerator. This particular model will produce seven round or crescent shaped cubes every cycle. The ideal temperature of a freezer is zero degrees Fahrenheit. If the temperature in your freezer is at an appropriate level and ice is still not being made it could be an issue with the water inlet valve or your ice maker assembly. If you determine it is the ice maker, this is the replacement you need. This kit includes a set of installation instructions, a 4-pin round plug-in connector, 6 post plug-in connector, tube and fill cup. Before you start this repair, you should shut off the water supply and unplug your appliance. Please note, when you have installed your new ice maker it can take up to 24 hours for it to begin producing ice.

Order within the next 5 hrs and your part ships today!
$3.46

SWITCH LIGHT

The interior light of your refrigerator is controlled by a switch that is activated when the door is opened and closed. If your refrigerator light will not turn on, there could be ...

Order within the next 5 hrs and your part ships today!
$3.52

Evaporator/Condensor Fan Grommet

Order within the next 5 hrs and your part ships today!
$1.88

Compression Ring

This compression ring is meant to hold the evaporator fan motor in place in the freezer compartment of your refrigerator. This is is a genuine OEM part. The tools needed to complet...

Order within the next 5 hrs and your part ships today!
$23.28

Single Outlet Valve Kit

The water inlet valve on your refrigerator allows water to enter the ice maker and water dispenser. If your ice maker or water dispenser is not functioning properly, or you notice a leak, you may need to replace the single outlet valve. This single outlet valve has 1/4-inch compressions fittings and is intended for use with refrigerators that make crescent-shaped ice cubes. As per the manufacturer, this valve has a new quick connection. You must cut the retaining nut off your current plastic water line, and gently push it into the new valve. Be sure to disconnect the water and power sources from the refrigerator before you begin this repair.

Order within the next 5 hrs and your part ships today!
$5.58

Condenser Fans Blade Assembly

Order within the next 5 hrs and your part ships today!
$21.76

Run Capacitor

The function of the run capacitor is to help the compressor turn on and off while maintaining a constant temperature in your freezer. If you notice that your refrigerator or freezer is too warm, you may have to replace the run capacitor. This part is 1-1/2 inches in length and is made of black plastic with two metal prongs which connect to a wiring harness. The run capacitor is in the back of the refrigerator and is mounted to the condenser fan motor bracket with a 1/4-inch screw. You will need to remove the lower back panel of your refrigerator to access this part.

Order within the next 5 hrs and your part ships today!
$3.06

SCR 10-16 AB PNT20 1/2 S

This refrigerator door handle mounting screw connects your refrigerator door to the handle. The part is less than 1 inch in length, and can come in both silver and gold colors. Whe...

Order within the next 5 hrs and your part ships today!
$87.60

Drawer

This part is slanted at the back. Sold individually.

Order within the next 5 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Sticking Light Switch

  • Customer: Jonathan from Lilburn, GA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 83 of 95 people found this instruction helpful
I applied some tips learned by reading other reviews. So before I started I grabbed my trusty vise grip pliers and a small screw driver. I locked onto the switch actuator, the part that the refrigerator door pushes in, with the vise grips and pulled on it just hard enough to get the screw driver inserted in the right side to push in the catch clip so the swi... read more

water appearing under refrigerator

  • Customer: Larry from Dallas, TX
  • Difficulty: Really Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers, Wrench set
  • 26 of 29 people found this instruction helpful
Unplugged the refrigerator and turned off the water to the ice maker valve. Removed the water line at both ends (small crescent wrench). Removed the cover from the water valve area (two Phillips head screws). Removed the valve (two screws - small nut driver) and pulled off the two electrical connections.

Installed the new valve with the reverse pr... read more

not making ice

  • Customer: thomas from richmond, VA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 27 of 32 people found this instruction helpful
when the ice maker runs through its cycle, you should be able to hear the solinoid valve open, letting water into the ice maker. this was not happening for me. you can dissconnect the plug on the valve and put the two probes from a multimeter in the plug and set for AC volts. when the ice maker runs its cycle, at the end you should see the meter jump as pow... read more