Models > DP8700XTN1

DP8700XTN1 Whirlpool Dishwasher - Overview

Get Parts and Repair Help for DP8700XTN1

If you know the dishwasher repair part you need, you can browse the list of all parts on the DP8700XTN1, or you can search by name or part description. You can also find your part by where it is located on the DP8700XTN1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for DP8700XTN1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$33.52

Drain and Wash Impeller Kit

This dishwasher drain and wash impeller kit comes with both the drain and wash impeller, gaskets, chopper and installation screw. This part helps stop your dishwasher from leaking...

$3.51

Lid Spring

This metallic spring is for your dishwasher's soap cup cover.

$3.96

Rubber Washer

Sold individually. Used with the heating element.

$2.70

Hose Clamp

$23.05

Faucet Adapter

Used with some portable dishwashers and washers. NOTE: As per the factory, this is used for faucets with inside or outside threads. For female connection (outside) just remove t...

$2.70

Screw

This screw is sold individually.

$18.41

Detergent Dispenser Cover Kit

This kit also includes the lid hinge pin, spring, snap and latch.

$4.95

Touch-Up Paint - White

$2.03

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

$2.70

Screw - 8-18 x 1/2

Sold Individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Dishwasher Not Draining

  • Customer: Lewis from Portsmouth NH
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 91 of 126 people found this instruction helpful
Ordered both drain & wash impeller kit and the drain check valve with o-ring. Decided to test the cheaper drain check valve first. Pulled dishwasher out from wall & adjacent cabinetry; removed drain hose from disposer and drained as much water as possible; "jacked" side of dishwasher to gain access to drain hose and drain check valve; used pliers to remove ... read more

leaking from tub above motor

  • Customer: Daniel from Sarasota FL
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers, Socket set, Wrench set, Wrench(Adjustable)
  • 82 of 115 people found this instruction helpful
Disconnect unit and remove from under counter. remove lower spray arm, tip over dishwasher on it's back, diconnect wires from motor , unscrew drain fitting rotate motor mounts to and lift pump and motor assembly up and out from inside the dishwasher. thoughly clean all parts during pump disassembly( under running water and a toothbrush works well) . Lookin... read more

Grinding Noise

  • Customer: Gary from Dousman WI
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Socket set, Wrench set, Wrench(Adjustable)
  • 33 of 36 people found this instruction helpful
Grinding Noise when running. I was not sure of problem and thought that a new Dishwasher may be needed if motor was the problem. After taking the bottom rack and spray arms out I came across my first problem. I believe it was the impeller design that has a 1in hex nut with a bolt in middle that needed to be removed. I needed a 90 degree 1in wrench to hold im... read more