Models > DP450-C

DP450-C Jenn-Air Dishwasher - Overview

Get Parts and Repair Help for DP450-C

If you know the dishwasher repair part you need, you can browse the list of all parts on the DP450-C, or you can search by name or part description. You can also find your part by where it is located on the DP450-C by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$18.07

Float Switch

Water that fills your dishwasher lifts this float. When it reaches a certain level, the float triggers the float switch to shut off, thereby shutting off the flow of water into th...

$62.47

Fill/Drain Hose Assembly

This hose assembly is used for portable dishwashers.

$17.21

Detergent Cup Seal and Cover Kit

$5.43

Impeller Screw

$4.46

SCREW

10 - 16 x .375

Detergent Cup Cam and Spring Kit

An actuator connected to the timer is lifted by the cam and releases the detergent dispenser. There is a spring that holds the actuator tight against the cam, if the spring is broken the dispenser can stick open or closed.

$3.83

SCREW

$3.72

SCREW AND WASHER ASSEMBLY

PUMP REPAIR ASSEMBLY

TRACK SHAFT AND SEAL KIT

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

badly damaged gasket

  • Customer: John from Lomax IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 7 of 8 people found this instruction helpful
the coupling for the water hookup for my rollaway dishwasher was very badly damaged. After looking everywhere including authorized dealer and repair places, on-line at the manufactures parts website, I finally broke down and ordered the entire hose assembly. When it arrived, I simply used a toothpick to carefully remove the new gasket from the new part and p... read more

the hose wouldn't grip the faucet anymore it would fall off.

  • Customer: madison from greensboro NC
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 4 of 10 people found this instruction helpful
i took the dishwasher apart, took off the old hose and replace it with the new one. it was real easy. i smiled as my two yr. old tried to help me . i'm sure i'll be odering other parts in the future. read more

No water would enter in dishwasher

  • Customer: Rick from Laingsburg MI
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 2 of 4 people found this instruction helpful
Removed covers on the bottom of dishwasher so I could get access to area. Measured no voltage on water inlet pump. removed to wires from foat switch, one screw to remove float switch. When I pressed the float switch button to activate the switch would not move. Ordered and replaced the switch. 30 minutes tops read more