Models > DP3000XRN2 > Instructions

DP3000XRN2 Whirlpool Dishwasher - Instructions

All Instructions for the DP3000XRN2
76 - 90 of 120
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
broken roller wheels
Loading and unloading the dishwasher can be a pain if the rollers are not aligned or falling off. This part was easy to install even though it didn't exactly match the original (very old) dishwasher parts.
Parts Used:
Tandem Rack Rollers - Set of 4
  • Whitney from Menlo Park, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
We needed a new bottom dishrack the old one was very rusty
I ordered a new rack, snapped the stuff together, and slid the old one out and the new one in. Fit beautifully. Piece of cake and much cheaper than a new dishwasher.
Parts Used:
Lower Dishrack Kit
  • Katherine from Coos Bay, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
1 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
3 of 8 wheels had broken off bottom rack.
Piece of cake. Unsnapped the old parts, studied the new ones for a minute to orient myself, and snapped them on. Not quite as simple a twist as the old ones took, but no problem once they were lined up properly. Total time, about 5 minutes or less.
Parts Used:
Tandem Rack Rollers - Set of 4
  • Mederick from Gorham, ME
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Three rollers fell off
I removed the old rollers. This took a while to figure out how to get the old rollers off. Also it was difficult due to the fact that they had been on the basket for a long time. As soon as I figured out how to take them off and put the new ones on, it was fairly easy. The instructions were non -existent which is why it took a while.
Parts Used:
Tandem Rack Rollers - Set of 4
  • Susan from Oakland, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
melted waste water guard
removed what was left of old guard and replaced it with new.
Parts Used:
GUARD
  • Gary from Erving, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wheels broke on lower tray
pulled old wheel housing off and replaced with new replacements ones. Straightforward task.
Parts Used:
Tandem Rack Rollers - Set of 4
  • RICHARD from JERSEY SHORE, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
rear rollers on bottom rack broke off
real easy to install. i took off all 4 sets of rollers. i installed the first set improperly and the 2nd,3rd and 4th properly. i then went back and refasten the first one. no tools needed. 15 min.
Parts Used:
Tandem Rack Rollers - Set of 4
  • MARK from W.BARNSTABLE, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Part
I just installed the new part. There were no tools required. I bought an extra part
I ordered the part on Monday, and it arrivefor the other side in case it breaks.
d by FedEx the next day. I live in Southern California.

Great service, thanks.
Parts Used:
Upper Track End Cap
  • Gary from Palm Springs, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Installed wheel assemblies to rack
Assemblies snap on, no tools needed
Parts Used:
Lower Dishrack Kit
  • Philip from Greene, ME
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
6 wheels missing
easy - removed old wheel holders & pushed new

ones in place. parts came in two days !!!!
Parts Used:
Tandem Rack Rollers - Set of 4
  • Tom from Wappingers Falls, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Latch had broken on detergent dispenser cover
Remove retainer that holds door color slide in front of door & then remove the slide. Remove cardboard backing, remove electric latch release, remove latch & replace with new one. Open door & slide out the cup dispenser cover pin & spring & replace with new ones. This was all straight-forward & simple.
Parts Used:
Detergent Dispenser Cover Kit
  • Phillip D from Auburn, AL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
8 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
soap door hinge broke
I took the pin and i slide it through the first hole attached the spring then sldie it through the second hole and snap the cover on
Parts Used:
Detergent Dispenser Cover Kit
  • Michael from Las Vegas, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
4 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The previous rod holding the cup in place broke
Remove completely the old one and installed the new entire kit.
Parts Used:
Detergent Dispenser Cover Kit
  • Nicole from Newnan, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
2 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
was just missing the door and spring
You slide the pin that holds the door in the first hole. then you slide the spring in next. The you slide the pin through the last hole. After that you gently push the door onto the pin till it snaps into place. And your done.
Parts Used:
Detergent Dispenser Cover Kit
  • craig from Columbia, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
4 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Faucet adapter leaked
Replaced the faucet adapter, works fine
Parts Used:
Faucet Adapter
  • Ed from North East, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the DP3000XRN2
76 - 90 of 120