Models > DNF20J

DNF20J Maytag Freezer - Overview

Get Parts and Repair Help for DNF20J

If you know the freezer repair part you need, you can browse the list of all parts on the DNF20J, or you can search by name or part description. You can also find your part by where it is located on the DNF20J by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your freezer. We’ve also included any installation videos we have for DNF20J parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$15.44

Capicitor

This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.

$2.70

Screw

This screw is sold individually.

$6.98

Light Rocker Switch

$5.49

Bulb - 120v 25w

$3.82

SCREW

$2.70

SCREW

Sold individually.

$130.85

Door Gasket - White

$50.06

TIMER-DEF

$3.82

VENT-PLUG

$76.32

Evaporator Fan Motor

This evaporator fan motor circulates air over the coils. These coils will convert the heat into cool air, which is then circulated.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

My refrigerator stopped cooling and the freezer section stopped freezing

  • Customer: garth from forest lake MN
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 110 of 120 people found this instruction helpful
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck let's give her a shot ... read more

Lights inside refrigerator not working

  • Customer: Clint from Rayville MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 41 of 49 people found this instruction helpful
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. read more

Frozen items on top of freezer not quite frozen, bottom of freezer ok. Freezer alarm sounding.

  • Customer: Randall from Burlington WI
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 15 of 21 people found this instruction helpful
Disconnect power / Remove shelves / remove sheet metal panel in rear of freezer / disconnect fan wires / remove fan unit using nut driver. / reassemble. read more