Models > DM85KB 1

DM85KB-1 Magic Chef Microwave - Overview

Get Parts and Repair Help for DM85KB-1

If you know the microwave repair part you need, you can browse the list of all parts on the DM85KB-1, or you can search by name or part description. You can also find your part by where it is located on the DM85KB-1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.37

Ceramic Fuse - 20 Amp

This ceramic microwave fuse is white in the center, while each end is made of metal. This is a twenty amp fuse.

$4.46

Door Release Button - Black

$17.55

Light Bulb - 120v 25w

$51.91

CAPACITOR-

Turntable Tray - White

Turntable Gear

Microwave Turntable Roller Support

This turntable roller support is less than an inch long. It is made of plastic and is used for some microwaves.

CLIP

Turntable Roller

This turntable roller is less than an inch long. It is made of plastic and is used for some microwaves.

Pivot Pin

This pivot pin is just under an inch long. It is made of plastic and is used for many ranges and microwaves.

Common Symptoms of the DM85KB-1 [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

microwave oven blew fuse

  • Customer: tad from tamarack MN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 12 of 18 people found this instruction helpful
First I removed upper front grill by removing two Philips head screws on top and pulling off. This exposed the Philips head screw which holds control panel in place. After removing screw I pushed up on panel and it came off to expose fuse. With needle nose pliers I removed old fuse and again with pliers held new fuse in position. With the help of a bladed s... read more

arm on door release button broke

  • Customer: RICK from CASEY IL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 8 of 8 people found this instruction helpful
First i removed the 3 phillips head screws from the back of the microwave,these hold the wrap around cover in place, then slid the wrap around cover off towards the back side of microwave, next from inside the microwave i removed 1 screw holding the front operating panel, this screw is located staight up from the push button towards the top of the microwav... read more

Door release button broke on the inside of microwave so door would not open

  • Customer: Steven from Burton MI
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 5 of 7 people found this instruction helpful
Pryed face plate away from body and removed broken latch, replaced with new latch/release button (just sets in place) and pressed faceplate back into position. The beauty of all this is, I ordered this part on line, late on a Tuesday evening and had it in hand by Thursday afternoon!
Well done! Thank you! read more