Quick Question!

Have you ever purchased from PartSelect.com before?

Models > DM46KW-15T

DM46KW-15T Maytag Microwave - Overview

Parts and Repair Help for models starting with DM46KW-15T

If you know the microwave repair part you need, you can browse the list of all parts for models starting with DM46KW-15T, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Models starting with DM46KW-15T

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Turntable Gear

Microwave Turntable Roller Support

This turntable roller support is less than an inch long. It is made of plastic and is used for some microwaves.

CLIP

Turntable Roller

This turntable roller is less than an inch long. It is made of plastic and is used for some microwaves.

Pivot Pin

This pivot pin is just under an inch long. It is made of plastic and is used for many ranges and microwaves.

Rack Support

This microwave support is white in color and less than an inch long. It is made of plastic, and it helps to support the metal rack in your microwave.

CLIP - PUSH ON

TAPE- FOAM

BUTTON, DOOR RELEASE (WHT)

LATCH, STRIKE

Common Symptoms of models starting with DM46KW-15T

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

microwave oven blew fuse

  • Customer: tad from tamarack, MN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 17 of 23 people found this instruction helpful
First I removed upper front grill by removing two Philips head screws on top and pulling off. This exposed the Philips head screw which holds control panel in place. After removing screw I pushed up on panel and it came off to expose fuse. With needle nose pliers I removed old fuse and again with pliers held new fuse in position. With the help of a bladed s... read more

microve stopped working

  • Customer: Denice from Montgomery, AL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 10 of 16 people found this instruction helpful
Jenn-Air Microwave would not turn on. Clock worked , light worked, timer worked and would count down .I changed' Part #0813140 Switch, Micr} cost $8.99 plus shippingNow it works Thank You for good advise read more

Died while heating lasagna

  • Customer: connie from madison, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 9 of 15 people found this instruction helpful
Removed 4 small star head screws from back of microwave, lifted body off, removed blown fuse and replaced with new one (found where cord enters). This model is stainless inside and out and I like it a lot. It is also sold by Daewoo and a few other manufacturers. read more