Models > DM46K-16T Maytag

DM46K-16T Maytag Microwave - Overview

Get Parts and Repair Help for DM46K-16T

If you know the microwave repair part you need, you can browse the list of all parts on the DM46K-16T, or you can search by name or part description. You can also find your part by where it is located on the DM46K-16T by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$3.22

Ceramic Fuse - 20 Amp

This ceramic microwave fuse is white in the center, while each end is made of metal. This is a twenty amp fuse.

$17.55

Light Bulb - 120v 25w

$34.55

Turntable Tray - White

Turntable Gear

Microwave Turntable Roller Support

This turntable roller support is less than an inch long. It is made of plastic and is used for some microwaves.

Door Release Button - black

This door release button is five inches long. It is all black in color and is made entirely of plastic.

CLIP

Turntable Roller

This turntable roller is less than an inch long. It is made of plastic and is used for some microwaves.

Pivot Pin

This pivot pin is just under an inch long. It is made of plastic and is used for many ranges and microwaves.

Rack Support

This microwave support is white in color and less than an inch long. It is made of plastic, and it helps to support the metal rack in your microwave.

Common Symptoms of the DM46K-16T [Viewing 1 of 33]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

microwave oven blew fuse

  • Customer: tad from tamarack MN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 16 of 22 people found this instruction helpful
First I removed upper front grill by removing two Philips head screws on top and pulling off. This exposed the Philips head screw which holds control panel in place. After removing screw I pushed up on panel and it came off to expose fuse. With needle nose pliers I removed old fuse and again with pliers held new fuse in position. With the help of a bladed s... read more

microve stopped working

  • Customer: Denice from Montgomery AL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 8 of 14 people found this instruction helpful
Jenn-Air Microwave would not turn on. Clock worked , light worked, timer worked and would count down .I changed' Part #0813140 Switch, Micr} cost $8.99 plus shippingNow it works Thank You for good advise read more

Died while heating lasagna

  • Customer: connie from madison NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 6 of 11 people found this instruction helpful
Removed 4 small star head screws from back of microwave, lifted body off, removed blown fuse and replaced with new one (found where cord enters). This model is stainless inside and out and I like it a lot. It is also sold by Daewoo and a few other manufacturers. read more