Models > DLL2880ABC

DLL2880ABC Hotpoint Dryer - Overview

Get Parts and Repair Help for DLL2880ABC

If you know the dryer repair part you need, you can browse the list of all parts on the DLL2880ABC, or you can search by name or part description. You can also find your part by where it is located on the DLL2880ABC by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for DLL2880ABC parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the DLL2880ABC [Viewing 3 of 3]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$48.46

Rear Drum Bearing Kit

This rear drum bearing kit comes with a shaft, bearing and installation instructions. The bearing plate comes with a slot in it for the ground strap. Helps keep your dryer running...

Order within the next 8 hrs and your part ships today!
$3.00

LATCH DOOR

This part helps to keep the door closed while the machine is running.

Order within the next 8 hrs and your part ships today!
$4.52

Rear Drum Bearing

This part is the rear dryer drum bearing only. This part helps keep your dryer running smoothly as possible with as little noise as possible.

Order within the next 8 hrs and your part ships today!
$4.05

Adjustable Leveling Screw

Order within the next 8 hrs and your part ships today!
$19.13

Gas Igniter

Be very careful to not handle the igniter by its gray part. Hold it by its white tip only.

Order within the next 8 hrs and your part ships today!
$29.14

Door Switch

This part has three terminals.

Order within the next 8 hrs and your part ships today!
$1.93

Screw

This screw is sold individually.

Order within the next 8 hrs and your part ships today!
$133.02

Drive Motor

Replaces "T" and "V" style motors. Includes two motor pulleys. If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered.

Order within the next 8 hrs and your part ships today!
$8.25

Idler Pulley Wheel

This white idler pulley is used for many clothes dryers. A dryer's idler pulley wheel serves to help the belt to rotate the drum.

Order within the next 8 hrs and your part ships today!
$38.96

Blower Wheel

This wheel attaches to the motor.

Order within the next 8 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Gas dryer heat would not come on

  • Customer: Jeff from Seattle WA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Wrench set
  • 30 of 39 people found this instruction helpful
Unplugged dryer, opened lower panel. Loosened the bolt that holds igniter assembly to gas unit and removed old igniter. Put new igniter in the pinch clamp then (being VERY careful so as not to crack new part) replaced igniter assembly and tightened its bolt firmly. Voilà, ignition! read more

replqce bad switch

  • Customer: Robert from Virginia Beach VA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 17 of 18 people found this instruction helpful
pried old switch assembly from front of machine with screw driver. removed 2 electrical connections. shorted terminals to verify problem. inserted wiring terminals to new switch. verified operation and then pushed switch assembly into machine opening. read more

Squeaking Dryer - Rear Drum bearing gone bad

  • Customer: Jason from Cary NC
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Screw drivers, Socket set
  • 17 of 20 people found this instruction helpful
First, I loosened the the top control panel and then loosened the top flat roof panel which allowed me access to the inside of the dryer. Then, I removed the front panel which allowed access to the drum. I was amazed at the amount of lint that was inside the dryer itself. Most of my time was spent in the disassembly and cleaning of the internal cavity around... read more