Models > DLL2650RCL

DLL2650RCL Hotpoint Dryer - Overview

Parts and Repair Help for models starting with DLL2650RCL

If you know the dryer repair part you need, you can browse the list of all parts for models starting with DLL2650RCL, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for DLL2650RCL parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Models starting with DLL2650RCL

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$4.05

D-Shaped Knob Insert Clip

Sold individually.

Order within the next 3 hrs and your part ships today!
$3.79

Light Bulb - 120V 10W

Order within the next 3 hrs and your part ships today!
$46.29

Rear Drum Bearing Kit

This rear drum bearing kit comes with a shaft, bearing and installation instructions. The bearing plate comes with a slot in it for the ground strap. Helps keep your dryer running...

Order within the next 3 hrs and your part ships today!
$8.52

Drive Belt

This belt has a length of 87 inches, width of 1/4”, flat, with 4 ridges.

Order within the next 3 hrs and your part ships today!
$15.39

Idler Pulley Wheel

A dryer's idler pulley wheel serves to help the belt to rotate the drum.

Order within the next 3 hrs and your part ships today!
$12.18

Lint Filter with Frame

Order within the next 3 hrs and your part ships today!
$1.93

Screw

This screw is sold individually.

Order within the next 3 hrs and your part ships today!
$3.00

LATCH DOOR

Order within the next 3 hrs and your part ships today!
$29.04

'M' Series Primary Dual Coil Gas Valve

This 'M' series coil is both a boosting as well as a holding coil. It has three terminals.

Order within the next 3 hrs and your part ships today!
$24.57

'M' Series Secondary Coil - 2 Terminals

Order within the next 3 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

the rear drum bearing was worn the dryer became very noisy

  • Customer: Michael from Warwick RI
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 125 of 140 people found this instruction helpful
i removed the scews just above thr opened dryer door, i was then able to swing the dryer top cover back. i then removed the lower front panel screws ,the the screws securing the front of the dryer ( where the door is ) and removed it. there are just 2 wires to disconnect. after the front is removed you gain full access for drum removal, remove the belt make ... read more

dryer belt broke

  • Customer: Matt from La Belle MO
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set
  • 93 of 106 people found this instruction helpful
first I took the dryer apart 1st thing i did was unplug the power supply (safety first) then I removed the top of the unit then removed the front cleaned all the lint from the inside of the cabinet I found the proper belt size on part select.com the next day I had my dryer belt delivered (which cost 1/3 the price of the local repair shop price)
then I ... read more

The dryer drum turned ok, but the gas heat did not start.

  • Customer: Gary L. from Freeport IL
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 60 of 83 people found this instruction helpful
First I found and watched three videos on how to open the dryer and replace the igniter.
Then I opened the dryer, but I did not remove the belt as suggested in the video, and then I removed the ignitor and flame detecter as the videos had shown.
I got on-line and ordered the new parts from PartsSelect in the afternoon and had them in my hands the ... read more