Models > DLL2650BJL > Parts

DLL2650BJL Hotpoint Dryer - Parts

All parts for the Hotpoint Dryer DLL2650BJL

Below is a list of all parts for the Hotpoint Dryer DLL2650BJL - Residential . To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the DLL2650BJL
1-14 of 166
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

D-Shaped Knob Insert Clip

Sold individually.


Light Bulb - 120V 10W

Sold individually. This light bulb has a screw in base.


Rear Drum Bearing Kit

This rear drum bearing kit comes with a shaft, bearing and installation instructions. The bearing plate comes with a slot in it for the ground strap. Helps keep your dryer running...


Drive Belt

This belt has a length of 87 inches, width of 1/4”, flat, with 4 ridges.


Idler Pulley Wheel

A dryer's idler pulley wheel serves to help the belt to rotate the drum.



This part helps to keep the door closed while the machine is running.


Lint Filter with Frame


'M' Series Primary Dual Coil Gas Valve

This 'M' series coil is both a boosting as well as a holding coil. It has three terminals.


'M' Series Secondary Coil - 2 Terminals


Rear Drum Bearing

This part is the rear dryer drum bearing only. This part helps keep your dryer running smoothly as possible with as little noise as possible.


Front Drum Slide Kit

This front drum slide kit comes with two slides with the apppropriate mounting hardware.


Adjustable Leveling Screw


Igniter with Bracket and Wire Harness

NOTE: Be very careful to not handle the igniter by its gray part as it's very fragile. Hold it by its white tip only.


Door Switch

This part has three terminals. Note: Use the two smaller terminals for models that only have two wires to the switch.

All Parts for the DLL2650BJL
1-14 of 166