Models > DLL1550ABL > Parts

DLL1550ABL Hotpoint Dryer - Parts

All parts for the Hotpoint Dryer DLL1550ABL

Below is a list of all parts for the Hotpoint Dryer DLL1550ABL - Residential . To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the DLL1550ABL
1-14 of 185
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Rear Drum Bearing Kit

This rear drum bearing kit comes with a shaft, bearing and installation instructions. The bearing plate comes with a slot in it for the ground strap. Helps keep your dryer running...


Drive Belt

This belt has a length of 87 inches, width of 1/4”, flat, with 4 ridges.



This part helps to keep the door closed while the machine is running.


Lint Filter with Frame


Rear Drum Bearing

This part is the rear dryer drum bearing only. This part helps keep your dryer running smoothly as possible with as little noise as possible.


Front Drum Slide Kit

This front drum slide kit comes with two slides with the apppropriate mounting hardware.


Adjustable Leveling Screw


Gas Igniter

Be very careful to not handle the igniter by its gray part. Hold it by its white tip only.


Door Switch

This part has three terminals. Note: Use the two smaller terminals for models that only have two wires to the switch.


Idler Pulley Wheel

This white idler pulley is used for many clothes dryers. A dryer's idler pulley wheel serves to help the belt to rotate the drum.



This screw is sold individually.


Drive Motor

Replaces "T" and "V" style motors. Includes two motor pulleys. If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered.


Blower Wheel

This wheel attaches to the motor.


Heat Detector

Also known as Flame Sensor/Detector.

All Parts for the DLL1550ABL
1-14 of 185