Models > DLG5988WM

DLG5988WM LGE - Overview

Get Parts and Repair Help for DLG5988WM

If you know the repair part you need, you can browse the list of all parts on the DLG5988WM, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your . Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$25.79

Lint Filter

This part has the felt strip and is used to collect lint as it passes through the dryer vent.

$21.75

ROLLER ASSEMBLY

$10.52

Thermistor,NTC

$3.06

Sensor

$22.86

Poly-V Drive Belt

$10.52

Thermostat

$8.18

Thermostat Assembly

$40.29

Gas Igniter

$6.34

Locker Assembly

$1.96

Leg

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

I broke the igniter while adapting from Natural gas to LPG

  • Customer: Nathan from Mount Vernon WA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Wrench set
  • 0 of 0 people found this instruction helpful
This was a repair from a repair. It started as a conversion to LPG, in the process the igniter broke. The parts arrived quickly and we were able to get it back together and the wife is happy. Thanks. read more

Broke igniter replacing thermostats

  • Customer: Jeff from Ogden UT
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Unplugged dryer. Removed front panel. removed nut holding old igniter. Unplugged old igniter, plugged in new igniter, and mounted new igniter with screw using nut driver. read more

Loud squealing noise coming from dryer.

  • Customer: Todd from Fremont OH
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set, Wrench set
  • 0 of 0 people found this instruction helpful
Not knowing whether it was the pulley, tensioner, or drum roller I had previously pulled the dryer apart and noticed one roller shaft was rusty for some reason. When the part came in (which was quite fast)I disassembled the dryer to the point that I could remove the left rear drum roller. Replaced the roller and reassembled the dryer (to my surprise withou... read more