Models > DLEV

DLEV LG Dryer - Overview

Models starting with DLEV

Keep searches simple, eg. "belt" or "pump".
Light Bulb – Part Number: 6913EL3001E
Light Bulb
★★★★★
★★★★★
(2)
PartSelect #: PS11728997
Manufacturer #: 6913EL3001E
$22.03
  In Stock
Noise Filter Assembly – Part Number: 6201EC1006T
Noise Filter Assembly
★★★★★
★★★★★
(2)
PartSelect #: PS3528920
Manufacturer #: 6201EC1006T
$73.65
  In Stock
Thermistor,NTC – Part Number: 6323EL2001C
Thermistor,NTC
★★★★★
★★★★★
(1)
PartSelect #: PS3529027
Manufacturer #: 6323EL2001C
$27.20
  Special Order
Thermostat Assembly – Part Number: 6931EL3001D
Thermostat Assembly
PartSelect #: PS3530480
Manufacturer #: 6931EL3001D
$63.25
  Special Order
KNOB ASSEMBLY – Part Number: AEZ33665708
KNOB ASSEMBLY
PartSelect #: PS7788186
Manufacturer #: AEZ33665708
Sold individually. This knob accepts a D-shaped shaft.
$63.25
  In Stock
PARTS ASSEMBLY – Part Number: 383EEL3003E
PARTS ASSEMBLY
PartSelect #: PS12114673
Manufacturer #: 383EEL3003E
$104.55
  Special Order
Belt,Poly V – Part Number: 4400EL1001A
Belt,Poly V
PartSelect #: PS3522926
Manufacturer #: 4400EL1001A
  No Longer Available
Gasket – Part Number: 4986EL1003A
Gasket
PartSelect #: PS3524968
Manufacturer #: 4986EL1003A
  No Longer Available
Slider – Part Number: 4276EL3002A
Slider
PartSelect #: PS3522884
Manufacturer #: 4276EL3002A
$8.28
  Special Order
Leg Assembly – Part Number: 4779EA3001B
Leg Assembly
PartSelect #: PS3523575
Manufacturer #: 4779EA3001B
  No Longer Available
Lifter – Part Number: 4432EL1003A
Lifter
PartSelect #: PS3522963
Manufacturer #: 4432EL1003A
$15.78
  Special Order
Switch Assembly,Safety – Part Number: 6601EL3001B
Switch Assembly,Safety
PartSelect #: PS3529309
Manufacturer #: 6601EL3001B
  No Longer Available

Common Symptoms of models starting with DLEV

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No power to dishwasher. Confirmed that outlet had power coming out.
Turn off circuit breaker. Turn off water at shutoff valve usually located under sink. Disconnect water line from dishwasher. Disconnect wires for the power feed from cord, Marked corresponding wires upon removal for re-installation. Remove 2 mounting screws that secure dishwasher to counter. Slide dishwasher out from counter and turn upside down. Use a blanket to prevent scratching of surfaces. Locate component on the back portion of the dishwasher. Unplug 2 wiring harnesses. My part was held on by 2 phillip screws. One in front, the other in the back along the leg bracket support. Once removed, reverse the order of removal. The i a You Tube video you can locate fr this removal. They said that you needed to release a clip to get the part out. Mine had a screw holding it on the back side. This difference cause about an extra 1/2 hour before I was able to figure out that there was NO clip that was being shown on the video. After that, The replacement went smoothly and we were having the dishes washed later that day.
Parts Used:
Noise Filter Assembly
  • JOHN from FORT MYERS, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Light bulb in dryer burndt
Removed cover replaced bulb
Parts Used:
Light Bulb
  • Duane from TROY, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
4 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Unit would not start up
Conclusion was that either the control panel or the noise filter (an electrical fuse apparatus)was bad. Disconnected the water line, turned off power, and pulled unit out from cabinets. Determined that voltage was going into the noise filter (white harness) but almost no voltage coming out (red harness). Ordered noise filter. Hardest part was removing old noise filter from dishwasher frame without removing the whole unit from cabinet and turning upside down.One screw holds the part in the frame. With power off, I used a very small ratchet with phillips screw driver. Pried unit out with screw driver on side to the panel front. It has a retaining tab there.Installation was the reverse. Instead of putting screw back the way it was originally installed, I screwed it in from the outside of the frame. Much easier and just as solid. Tested unit with power on. Hooked up water line. Works great. Note: LG dishwahers have a high repair rate and that this part has a high failure rate. This LG unit was two years old. Never had to fix my 15 year old Sears dishwasher. It still works to this day. (I gave it to my daughter.)
Parts Used:
Noise Filter Assembly
  • LES from GAINESVILLE, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!