Models > DLB6850BCL > Parts

DLB6850BCL Hotpoint Dryer - Parts

All parts for the Hotpoint Dryer DLB6850BCL

Below is a list of all parts for the Hotpoint Dryer DLB6850BCL - Residential HOTPOINT DRYERS, ELECTRI. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the DLB6850BCL
1-14 of 156
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.62

D-Shaped Knob Insert Clip

Sold individually.

$46.29

Rear Drum Bearing Kit

This rear drum bearing kit comes with a shaft, bearing and installation instructions. The bearing plate comes with a slot in it for the ground strap. Helps keep your dryer running as smoothly as possible with as little noise as possible.

$8.52

Drive Belt

This belt has a length of 87 inches, width of 1/4”, flat, with 4 ridges.

$1.70

Screw

This screw is sold individually.

$12.18

Lint Filter with Frame

$2.79

LATCH DOOR

$4.41

Rear Drum Bearing

This part is the rear dryer drum bearing only. This part helps keep your dryer running smoothly as possible with as little noise as possible.

$23.29

Front Drum Slide Kit

This front drum slide kit comes with two slides with the apppropriate mounting hardware.

$14.39

High Limit Thermostat

With this high limit/safety thermostat, a dryer's heating element will cut out if the internal temperature reaches 260 degrees Fahrenheit. This element is meant as a safety device,...

$7.89

Idler Pulley Wheel

This white idler pulley is used for many clothes dryers. A dryer's idler pulley wheel serves to help the belt to rotate the drum.

$3.84

Adjustable Leveling Screw

$27.21

Door Switch

This part has three terminals.

$138.50

Motor

If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered.

$13.89

Thermostat - Limit: 145-15

It has a limit of 145 degrees Fahrenheit and a differential of 15 degrees. This means that with this thermostat, your dryer's heating element will cut out at 145 degrees Fahrenheit and kick back in when the dryer's internal temperature drops by 15 degrees.

All Parts for the DLB6850BCL
1-14 of 156