Models > DLB3400SBLWH > Parts

DLB3400SBLWH Hotpoint Dryer - Parts

All parts for the Hotpoint Dryer DLB3400SBLWH

Below is a list of all parts for the Hotpoint Dryer DLB3400SBLWH - Residential . To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the DLB3400SBLWH
15-28 of 106
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Door Switch

This part has three terminals. Note: Use the two smaller terminals for models that only have two wires to the switch.



This screw is sold individually.


Door Plug - White

Sold individually.


Drive Motor

Replaces "T" and "V" style motors. Includes two motor pulleys. If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered.


Air Duct Felt Seal

If your dryer is making a squeaking noise this seal may need to be replaced.


Heating Element Coil with Housing - 240V

They are all strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The heat produced is used to dry the clothes in your dryer


Blower Wheel

This wheel attaches to the motor.


Door Hinge

Screws NOT included.


Timer Knob

This knob accepts a D-shaped shaft.


Thermostat - Limit: 325

This one-time use safety thermostat has a limit of 325 degrees Fahrenheit. One this thermostat trips, you will have to replace it.





This hi-limit thermostat acts as a safety mechanism that keeps the dryer from overheating. With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 230 degrees Fahrenheit. The element will kick back in when the temperature drops to 200 degrees Fahrenheit - the differential of 30 degrees.


Motor Pulley with Screws



All Parts for the DLB3400SBLWH
15-28 of 106