Do you know what part you need?
Have you ever done a repair like this before?
Thank you for helping make our site better.
Below is a list of all parts for the Hotpoint Dryer DLB1550BDL - Residential . To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
This rear drum bearing kit comes with a shaft, bearing and installation instructions. The bearing plate comes with a slot in it for the ground strap. Helps keep your dryer running as smoothly as possible with as little noise as possible.
This belt has a length of 87 inches, width of 1/4”, flat, with 4 ridges.
This part helps to keep the door closed while the machine is running.
With this high limit/safety thermostat, a dryer's heating element will cut out if the internal temperature reaches 260 degrees Fahrenheit. This element is meant as a safety device,...
This front drum slide kit comes with two slides with the apppropriate mounting hardware.
This part is the rear dryer drum bearing only. This part helps keep your dryer running smoothly as possible with as little noise as possible.
This screw is sold individually.
This part has three terminals. Note: Use the two smaller terminals for models that only have two wires to the switch.
This white idler pulley is used for many clothes dryers. A dryer's idler pulley wheel serves to help the belt to rotate the drum.
This wheel attaches to the motor.
It has a limit of 145 degrees Fahrenheit and a differential of 15 degrees. This means that with this thermostat, your dryer's heating element will cut out at 145 degrees Fahrenheit and kick back in when the dryer's internal temperature drops by 15 degrees.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.