DHDSR46EG1WW General Electric Dryer - Instructions

All that was needed when I got the new handle from Fed-ex, was simply to line-up the clips with the holes in the door and push in till everything snapped in place. It was very easy. It took longer to open the package than to attach the handle.

Handle was the exact replacement slipped it into the handle slots and pushed in to lock in place.

watched the repair video first and it was very easy. took out screw in door to release top of dryer. removed top of dryer took out two screws holding the front panel to the side panels. removed old front drum bearing off the door replaced it with new one put it all back together. VERY VERY EASY. No repair man needed. I was impressed i could do it myself and saved tons of money not having to buy a new dryer.

Removed small metal band on shaft and installed new knob.Very simple but the video that came with e-mail was helpful as I did not realize the metal band had to come off till I saw the video.

followed what the repair video showed , step by step and replaced the drive belt on the drum.same with the front drum bearing and slides . if you watch the videos it will be no problem.took about 30 minutes total .

I had found out that reason the timer knob cracked was because the timer switch was turning very tight and caused the knob to crack and realized that dryer also needed a timer switched witch I also ordered from you. I really like how very helpful parts select is with the instructions you send along with the parts I ordered witch will save alot of time. Thanks For your help Ezequiel Escamilla

take off old knobs & replace with new units

pulled the old kob off and examined it and replaced it with the one i ordered...

So I have been living with Dryer issues for over a year now. Finally was about to buy a new dryer but saw a youtube video that showed me how to fix the problem and directed me to this website. I love this site! It made finding the problems, parts, and how to fix it so easy. Thank you.

Thanks completely to the free videos on PartSelect.com. At first I thought it was the bearing at the rear of the drum. After ordering that part, I realized the noise was from the front of the dryer. I watch some more videos and decided it was the Front Drum Bearing and the 4 drum bearing slides. Parts were very inexpensive. The job took less than 15 minutes. Just had to remove the top dryer panel and pull out the front panel (with door) just a little to replace the front bearing. My dryer is now super quiet and like brand new again.

Removed handle from box...walked into the laundry room...snapped part into the door panel. All done! Thanks for the prompt delivery.

I used the provided PartSelect video as a guide and easily completed the replacements in under an hour. Remove four screws, take the front of the dryer off, unplug the cables, remove and replace the front drum bearing and two drum bearing slides, reconnect cables, and re-attach the front of the dryer. NOTE: keep an eye on the three cables you have to unplug to remove the front of the dryer, as they will need to be re-attached in the correct locations once you're ready to re-assemble the dryer.

My dryer started to squeak so I checked several websites to fix the problem and found that PartsSelect was the most informative. The website easily directed me to the problem and provided me with the most likely cause. The top two issues for squeaking were the front drum bearing and the front drum bearing white slide. I purchased both and upon receiving the parts I watched the installation video which was very informative. After watching the video I realized that I needed two white slides and only one is in each packet. I went back online ordered the second extra white slide, two dark slides and the felt. Both orders were delivered quickly. The repair could not have been easier. All that I needed was a screwdriver and less than 30 minutes to do the repair. I found that both the white slides and dark slides were completely destroyed so I would definitely recommend purchasing both anytime you purchase the drum bearing.

This is the 2nd time we had to replace the slides. Not a big deal. Removed the top & front of the dyer and replaced the new slides. It's also a good time to vacuum out the inside while you have it apart. Be advised.... Get your tools ready. You'll be receiving your parts quickly. Couldn't believe how fast they arrived!

Thanks to your great DYI video I completed the repair in less than 45 minutes very easy.