DH40H0 Whirlpool Dehumidifier - Parts

Float

★★★★★

★★★★★

(5)

If the bucket is full indicator on your dehumidifier is on but the bucket is empty, you may have a problem with the float. If you notice that the float is warped or damaged, it should be replaced. Thi... Add to cart

Bucket and Float Kit This bucket and float kit, also known as water tank assembly, is for a dehumidifier is 14.5 inches long and 8.5 inches wide. The water tank extracts, traps, and contains the moisture from the air, whi...

Single Hex Head Screw Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2". Add to cart

Humidistat Control

★★★★★

★★★★★

(1)

The humidistat control, used in dehumidifiers, switches the dehumidifier on and off automatically to maintain humidity. If the switch does not work, the humidifier will not maintain the temperature pr... Add to cart

Screw Sold individually. Add to cart

Bucket Water Level Switch

★★★★★

★★★★★

(1)

This part is for your dehumidifier. The bucket water level switch is used to prevent water overflow when the bucket is full. You will not be able to tell if the switch has failed just by looking at it... Add to cart

Fan Motor This fan motor controls the circulating fan in the dehumidifier. Add to cart

Bi-Metal Thermostat Control with Clamp Also known as Dehumidifier anti-icing thermostat with clamp.

Float Clip The float clip works in a humidifier to ensure the float functions properly. The float is located near the humidifier bucket and monitors the water level as it rises and the clip keeps it in place. Th...

Zip Tie A zip tie, also known as a cable tie or a wire tie, is a fastening device that holds wires or tubing together. If a machine has wires or tubing that are easily shifted, you need to hold them tightly t... Add to cart

Castor Also known as wheel or roller. This part is sold individually.

PAN-DRAIN