Quick Question!

Have you ever purchased from PartSelect.com before?

Models > DH40G0 > Parts

DH40G0 Whirlpool Dehumidifier - Parts

All parts for the Whirlpool Dehumidifier DH40G0

Below is a list of all parts for the Whirlpool Dehumidifier DH40G0. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the DH40G0
1-14 of 59
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.02

Single Hex Head Screw

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

$33.65

Humidistat Control

The humidistat control, used in dehumidifiers, switches the dehumidifier on and off automatically to maintain humidity. If the switch does not work, the humidifier will not maintain the temperature properly. For this repair, screwdrivers are the only tools needed. First remove the knob and the screws from the top. Pry back the plastic retainers on one side of the old humidistat and remove wires before installing the new part and reattaching the two wires that connect to it. Remember to unplug the humidifier from the power source before installation.

$4.12

Float

If the bucket is full indicator on your dehumidifier is on but the bucket is empty, you may have a problem with the float. If you notice that the float is warped or damaged, it sho...

$4.89

TIE-WIRE

$62.66

Bucket and Float Kit

This bucket and float kit, also known as water tank assembly, is for a dehumidifier is 14.5 inches long and 8.5 inches wide. The water tank extracts, traps, and contains the moistu...

$4.69

Float Clip

The float clip works in a humidifier to ensure the float functions properly. The float is located near the humidifier bucket and monitors the water level as it rises and the clip keeps it in place. The float makes sure the water level is balanced and does not over flow. This float triggers the flow switch to shut off. If there is a defect with the clip, it can be a safety hazard as it might not be able to detect and stop an overflow. Make sure to unplug the dehumidifier from the power source before starting this replacement project as a safety precaution.

$58.12

Bucket Water Level Switch

This part is for your dehumidifier. The bucket water level switch is used to prevent water overflow when the bucket is full. You will not be able to tell if the switch has failed j...

$144.15

Fan Motor

This fan motor controls the circulating fan in the dehumidifier.

Castor

Also known as wheel or roller. This part is sold individually.

PAN-DRAIN

$27.97

CORD-POWER

$71.53

RELAY-STRT

$18.79

BARRIER

$35.24

Valve, Access (1/4``)

All Parts for the DH40G0
1-14 of 59