Models > DH37D7GA- (5F45A)

DH37D7GA- (5F45A) Maytag Dehumidifier - Overview

Get Parts and Repair Help for DH37D7GA-

If you know the dehumidifier repair part you need, you can browse the list of all parts on the DH37D7GA-, or you can search by name or part description. You can also find your part by where it is located on the DH37D7GA- by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the DH37D7GA- [Viewing 2 of 2]

$2.70

Screw

This screw is sold individually.

$2.70

Screw - 6-32 x 5/16

$37.05

Condensor Fan Blade - Black

This blade comes with a retaining clip and screw.

HUMIDISTAT

SWITCH, OVERFLOW CONTROL

FAN MOTOR

THERMOSTAT

USE WPL 61006030

CASTER

$3.81

CLIP- COMP

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The old blade separated from the shaft.

  • Customer: William from Oriskany NY
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
Removed all screws from the outside case, then I had access to the motor. Removed 4 screws from the bracket holding the motor assembly in place, removed it from the case. Next I pulled off the broken fan part, installed the new blade and secured it with the supplied bracket. Next I installed the motor assembly in reverse with the 4 screws I removed earlie... read more