Quick Question!

Have you ever purchased from PartSelect.com before?

Models > DG90 Maytag

DG90 Maytag Dryer - Overview

Get Parts and Repair Help for DG90

If you know the dryer repair part you need, you can browse the list of all parts on the DG90, or you can search by name or part description. You can also find your part by where it is located on the DG90 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for DG90 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$10.35

Adjustable Levelling Leg

Sold Individually. This adjustable leveling leg comes with a stop nut.

Order within the next 11 hrs and your part ships today!
$173.88

Lower Dishrack Kit

This kit comes with the wheels, bumpers, fold down tine and flexrow retainer.

Order within the next 11 hrs and your part ships today!
$39.42

Door Gasket

Order within the next 11 hrs and your part ships today!
$29.21

Lint Filter

This filter collects lint as it passes through the dryer vent.

Order within the next 11 hrs and your part ships today!
$33.38

FELT SEAL

Order within the next 11 hrs and your part ships today!

START SWIT

$4.89

SCREW

Order within the next 11 hrs and your part ships today!

SCREW

SET SCREW-

$4.79

Nut - 1/4-28 x 5/32

Order within the next 11 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lower Dishwasher rack replacement

  • Customer: Claire from Saratoga springs, NY
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 34 of 51 people found this instruction helpful
I ordered the part and was hoping to just take out one rack and put in the other, there were NO instructions or even a diagram of the rack. There was a fold down rack that was not attached and a few parts that I have no idea what they are. This was very discouraging. The main thing is that the rack is quite a bit lighter than the original one so I doubt i... read more

Dryer not heating

  • Customer: William from Exmore, VA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Wrench set
  • 14 of 15 people found this instruction helpful
First let me say that this dryer is at least 30 years old. The only repairs it has needed up to this point were a set of belts and lint screen holder.

I researched and found a list of items to check for dryer not heating. Only 3 items were listed as possible causes, the Heating Element, Cycling Thermostat, and Heating Element Terminal & Insulator.... read more

Temperature setting not working

  • Customer: Robert from Buffalo, NY
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 14 of 17 people found this instruction helpful
Took off back cover, thermostat was easily identified because of photos I've seen on website. Took 2 connectors off, removed 2 screws and removed old thermostat. That was pretty much it!

NOTE: Replacement thermostat 694674 has an adjustable temperature range setting that MUST be manually set prior to installing! You need to use the enclosed chart ... read more