Mon-Fri: 7am-1am EST / Sat-Sun: 7am-11pm EST
If you know the dryer repair part you need, you can browse the list of all parts on the DG21CT, or you can search by name or part description. You can also find your part by where it is located on the DG21CT by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for DG21CT parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.
This drum support roller includes one drum roller and two bearings. Most dryers use two drum rollers, and is recommended to change both at once.
At 100" in length, this dryer drum belt is 3/8" wide and has 5 ridges. This is the belt that is from the tumbler to the main drive motor.
This front glide kit comes with a blue plastic glide, a brown cork pad, and two metallic rivets. Two kits are required per appliance. Also, a rivet tool is required for this kit -...
This roller shaft acts as the axel for the drum roller. Also known as drum roller axle.
This comes with a metallic hub clip to hold it firmly in place.
This white lint filter is a slide-in style type of screen. This filter collects lint as it passes through the dryer vent.
Please NOTE: You must be able to read the words "Clean Before Loading". If you cannot read the words, then it will not fit your appliance.
This metallic retaining ring is less than an inch in diameter. It is made entirely of metal.
This part senses the flame for heat allowing the gas valve to open.
This flat style igniter comes with a wire harness connector. This part ignites the gas within the dryer. Bracket is NOT included.
Fixed by these parts
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2015 , Eldis Group Partnership. All rights reserved.