Quick Question!

Have you ever purchased from PartSelect.com before?

Models > DG21CA

DG21CA Maytag Dryer - Overview

Get Parts and Repair Help for DG21CA

If you know the dryer repair part you need, you can browse the list of all parts on the DG21CA, or you can search by name or part description. You can also find your part by where it is located on the DG21CA by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for DG21CA parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$15.85

Drum Support Roller Kit

This drum support roller includes one drum roller and two bearings. Most dryers use two drum rollers, and is recommended to change both at once.

Order within the next 1 hr and 56 mins and your part ships today!
$13.98

Tumbler and Motor Belt

At 100 inches in length, this dryer drum belt is 3/8 of an inch wide and has five ridges. This belt is all black in color and it is made entirely of rubber.

Order within the next 1 hr and 56 mins and your part ships today!
$9.89

Front Glide Kit

This front glide kit comes with a blue plastic glide, a brown cork pad, and two metallic rivets. Two kits are required per appliance. Also, a rivet tool is required for this kit -...

Order within the next 1 hr and 56 mins and your part ships today!
$6.20

Roller Shaft

This roller shaft acts as the axel for the drum roller. Also known as drum roller axle.

Order within the next 1 hr and 56 mins and your part ships today!
$15.70

Blower Wheel with Clamp

This comes with a metallic hub clamp to hold it firmly in place.

Order within the next 1 hr and 56 mins and your part ships today!
$5.15

Retaining Ring

This metallic retaining ring is less than an inch in diameter. It is made entirely of metal.

Order within the next 1 hr and 56 mins and your part ships today!
$29.50

Radiant Flame Sensor

This part senses the flame for heat allowing the gas valve to open.This flame sensor is three inches long and is used for many gas clothes dryers.This flame sensor assembly is made...

Order within the next 1 hr and 56 mins and your part ships today!
$4.93

Drum Roller Shaft Washer

This roller shaft washer is just under an inch in diameter and is used for some of Whirlpool's brands of clothes dryers.Sold individually.

Order within the next 1 hr and 56 mins and your part ships today!
$16.70

Flat Style Igniter

This flat style igniter comes with a wire harness connector. This part ignites the gas within the dryer. Bracket is NOT included.

Order within the next 1 hr and 56 mins and your part ships today!
$10.15

Idler Pulley Wheel

This part is used to help the belt to rotate the drum. It is white and made of plastic with a metallic bearing in the center.

Order within the next 1 hr and 56 mins and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The blower fan (nylon) stripped off the motor shaft (steel)

  • Customer: Stephen from Lafayette, IN
  • Difficulty: Really Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 516 of 516 people found this instruction helpful
Removed the front cover (screws on bottom 0f face)...removed blower cover....spring pliers to remove and install blower fan. the rest of the time was spent cleaning the inside of the shell as well as the vent. Reassembled and dryer runs better than it has for many years. read more

dryer squeeking

  • Customer: gerald from park city, MT
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers, Socket set, Wrench set
  • 441 of 461 people found this instruction helpful
removed front panel,lifted top, removed drum and drive belt,remove old rollers and acc and instlled new and reinstalled dryer parts. read more

Dryer Stopped Heating

  • Customer: Osvaldo from Albuquerque, NM
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Socket set
  • 216 of 235 people found this instruction helpful
If everything else is working ( tumbler and timer ) except for the heating. Your first bet would be checking your flat style igniter. Mine was cracked, something that I wouldnt have seen unless I had taken it off. Because of the crack no current was being passing through, therefore the igniter wasnt heating to its amber color. Since there wasnt any curr... read more