Models > DG105

DG105 Maytag Dryer - Overview

Get Parts and Repair Help for DG105

If you know the dryer repair part you need, you can browse the list of all parts on the DG105, or you can search by name or part description. You can also find your part by where it is located on the DG105 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for DG105 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.70

Drum Roller Shaft Washer

This part is sold individually.

$10.64

High Temperature Adhesive - 2oz.

$2.70

Screw

This screw is sold individually.

$3.76

Adjustable Levelling Leg

Sold Individually. This adjustable leveling leg comes with a stop nut.

$7.52

Rubber Foot Pad

This foot pad is made entirely of rubber and is gray in color. This pad is intended for use with washers and some dryers. Sold individually.

$144.23

Upper Dishrack Kit

The dishrack kit comes with the dishrack, rollers, adjustable tines, and clips. Must be assembled. Note: This part has been redesigned by the manufacture. Blue is no longer available. White ONLY.

$198.64

Lower Dishrack Kit

This kit comes with the wheels, bumpers, fold down tine and flexrow retainer.

$25.84

Thermostat Knob Dial

This black thermostat knob dial is just under three inches in diameter.

$23.16

Lint Filter

This filter collects lint as it passes through the dryer vent.

$18.02

DRIVE BELT

This belt is V-shaped, 3/8 of an inch wide, and drives the drum.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Tines were broken and rack was damaged

  • Customer: Dennis from Littleton CO
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 34 of 59 people found this instruction helpful
Replaced the dish rack.

Removed the retaining clips on the front of the rail and removed the old rack.

Removed the spray arm assembly from the old rack.

Assembled the new rack, with the supplied parts from the kit. Using the old rack to know where some parts needed to be placed.

Put the spray arm assembly on the... read more

Lower Dishwasher rack replacement

  • Customer: Claire from Saratoga springs NY
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 23 of 34 people found this instruction helpful
I ordered the part and was hoping to just take out one rack and put in the other, there were NO instructions or even a diagram of the rack. There was a fold down rack that was not attached and a few parts that I have no idea what they are. This was very discouraging. The main thing is that the rack is quite a bit lighter than the original one so I doubt i... read more

rollers and clips on botton dishrack were broken

  • Customer: Diane from Waltham MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 18 of 29 people found this instruction helpful
I pulled off the old clips and easily replaced them with the new clips and popped on the wheels.
I replaced 8 clips and 8 wheels in less than 15mins read more