Quick Question!

Have you ever purchased from PartSelect.com before?

Models > DG101

DG101 Maytag Washer - Overview

Get Parts and Repair Help for DG101

If you know the washer repair part you need, you can browse the list of all parts on the DG101, or you can search by name or part description. You can also find your part by where it is located on the DG101 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your washer. We’ve also included any installation videos we have for DG101 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$4.93

Drum Roller Shaft Washer

This roller shaft washer is just under an inch in diameter and is used for some of Whirlpool's brands of clothes dryers.Sold individually.

$6.08

Rubber Foot Pad

This foot pad is just over an inch in diameter. It is made entirely of rubber and is gray in color. This pad is intended for use with washers and some dryers.

$14.92

High Temperature Adhesive - 2oz.

$10.35

Adjustable Levelling Leg

Sold Individually. This adjustable leveling leg comes with a stop nut.

$5.10

Screw, 8/18 x 3/8

This screw is sold individually.

$173.88

Lower Dishrack Kit

This kit comes with the wheels, bumpers, fold down tine and flexrow retainer.

$185.41

Upper Dishrack

Dishrack ONLY. Wheels NOT included,

$19.64

Standard V Belt - 46.5"

This 46-1/2 long dryer belt is used for many of Maytag's brands of clothes dryers. It is V-shaped, 3/8 of an inch wide, and drives the drum.

$27.40

Standard V Belt - 56"

This 56 long dryer belt is used for many of Maytag's brands of clothes dryers. It is V-shaped, 3/8 of an inch wide, and drives the motor.

$21.76

Motor Clip

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lower Dishwasher rack replacement

  • Customer: Claire from Saratoga springs, NY
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 35 of 52 people found this instruction helpful
I ordered the part and was hoping to just take out one rack and put in the other, there were NO instructions or even a diagram of the rack. There was a fold down rack that was not attached and a few parts that I have no idea what they are. This was very discouraging. The main thing is that the rack is quite a bit lighter than the original one so I doubt i... read more

Tines were broken and rack was damaged

  • Customer: Dennis from Littleton, CO
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 40 of 68 people found this instruction helpful
Replaced the dish rack.

Removed the retaining clips on the front of the rail and removed the old rack.

Removed the spray arm assembly from the old rack.

Assembled the new rack, with the supplied parts from the kit. Using the old rack to know where some parts needed to be placed.

Put the spray arm assembly on the... read more

bottom rack was starting to rust away and we needed a new one

  • Customer: pat from muncy, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 15 of 21 people found this instruction helpful
The dishrack came in one box I opened the box snapped on the rollers and the bumpers and put it in the dishwasher, could not have been easier Thank you partselect read more