Models > DG100 Maytag

DG100 Maytag Dryer - Overview

Get Parts and Repair Help for DG100

If you know the dryer repair part you need, you can browse the list of all parts on the DG100, or you can search by name or part description. You can also find your part by where it is located on the DG100 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for DG100 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$4.82

Drum Roller Shaft Washer

Sold individually.

Order within the next 10 hrs and your part ships today!
$11.75

High Temperature Adhesive - 2oz.

Order within the next 10 hrs and your part ships today!
$2.70

Screw

This screw is sold individually.

Order within the next 10 hrs and your part ships today!
$6.91

Adjustable Levelling Leg

Sold Individually. This adjustable leveling leg comes with a stop nut.

Order within the next 10 hrs and your part ships today!
$6.46

Rubber Foot Pad

This foot pad is made entirely of rubber and is gray in color. This pad is intended for use with washers and some dryers. Sold individually.

Order within the next 10 hrs and your part ships today!
$174.75

Lower Dishrack Kit

This kit comes with the wheels, bumpers, fold down tine and flexrow retainer.

Order within the next 10 hrs and your part ships today!
$26.36

Thermostat Knob Dial

This black thermostat knob dial is just under three inches in diameter.

Order within the next 10 hrs and your part ships today!
$27.67

Dryer Motor Belt

It is V-shaped, 3/8 of an inch wide and drives the motor.

Order within the next 10 hrs and your part ships today!
$18.38

DRIVE BELT

This belt is V-shaped, 3/8 of an inch wide, and drives the drum.

Order within the next 10 hrs and your part ships today!
$28.07

Lint Filter

This filter collects lint as it passes through the dryer vent.

Order within the next 10 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Tines were broken and rack was damaged

  • Customer: Dennis from Littleton CO
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 36 of 63 people found this instruction helpful
Replaced the dish rack.

Removed the retaining clips on the front of the rail and removed the old rack.

Removed the spray arm assembly from the old rack.

Assembled the new rack, with the supplied parts from the kit. Using the old rack to know where some parts needed to be placed.

Put the spray arm assembly on the... read more

Lower Dishwasher rack replacement

  • Customer: Claire from Saratoga springs NY
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 26 of 38 people found this instruction helpful
I ordered the part and was hoping to just take out one rack and put in the other, there were NO instructions or even a diagram of the rack. There was a fold down rack that was not attached and a few parts that I have no idea what they are. This was very discouraging. The main thing is that the rack is quite a bit lighter than the original one so I doubt i... read more

rollers and clips on botton dishrack were broken

  • Customer: Diane from Waltham MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 18 of 30 people found this instruction helpful
I pulled off the old clips and easily replaced them with the new clips and popped on the wheels.
I replaced 8 clips and 8 wheels in less than 15mins read more