Quick Question!

Have you ever purchased from PartSelect.com before?

Models > DF15BUMALT (8V065)

DF15BUMALT (8V065) Admiral Freezer - Overview

Get Parts and Repair Help for DF15BUMALT

If you know the freezer repair part you need, you can browse the list of all parts on the DF15BUMALT, or you can search by name or part description. You can also find your part by where it is located on the DF15BUMALT by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the DF15BUMALT

[Viewing 3 of 3]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.02

Screw

This screw is sold individually.

$3.02

Screw

This screw is sold individually.

$127.45

Door Gasket

The door gasket is used on vertical freezers. Screws are no longer included with this product. The gasket creates a tight closure around the opening of the door to ensure that outs...

$21.08

Gate Support - Right Hand

This gate support is designed to support the gate or fence on your vertical freezer. This part is designed for the right-hand side and differs from the left-hand side gate support. Be sure to note which side of your gate support is damaged before ordering this part. This product is sold individually. It is white in color and is made entirely of plastic. The gate support is approximately 6.5 inches in length and slightly less than an inch in width. This is an OEM part sourced directly from the manufacturer.

$13.68

Hinge Pin Bushing

This bushing is used with a 1/4-inch pin. This part is found in refrigerators (and sometimes freezers). The bushing provides a bearing surface for the hinge pin that rotates. Every...

$17.15

Drier (Service)

This drier may also be known as a refrigerator ultra-violet dye drier or a filter drier and is meant to be used with your fridge. This piece is a filter for the refrigerant that moves through the refrigerators sealed-system. The most common reason you will need to replace the filter is if your fridge/freezer is not starting. You should consider having this piece installed by an appliance repair technician that is trained and licensed. Installing this part requires specialized knowledge and tools. The installation will require the service technician to recover and recharge the refrigerant in the refrigerators sealed-system.

$19.48

Leveling Leg

This is an OEM part that is made of metal and sold individually. The leveling leg is generally used with refrigerators, dryers, freezers, ranges, cooktops, and microwaves. The leve...

$5.72

Washer

This door hinge washer is less than an inch in diameter. It is all white in color and it is made entirely of plastic.

$11.27

Bolt

$5.77

CLIP

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

gasket had harden. frost was building up quickly

  • Customer: LESLIE from TAPPAHANNOCK, VA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 21 of 25 people found this instruction helpful
the gasket peels back to reveal the approx 20 screwsholding gasket and door shelves. removed these. removed old gasket from door panel. new gasket needs to be stretched to get on door panel. align screw holes in door panel with screw holes in gasket. attached back to freezer door. this gasket did not seal securely when closing door. this gasket was ins... read more

No leveling legs

  • Customer: stephen from montgomery, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Wrench (Adjustable)
  • 1 of 2 people found this instruction helpful
Ordered the leveling bolts, very fast shipping, parts correct as shown. Purchased a condo by the shore, frige had no levelers, they went in smoothly & was done in no time.
Steve read more

Renters removed leveling legs from refrigerator. I don't know why!

  • Customer: Don from Frankfort, KY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
I tilted the unit back enough to scew the new legs into the threaded holes. read more